CT-502 Handheld Flip-Style Cellular Telephone
(170-1111)                 Message Glossary           Faxback Doc. # 46005

Display Message Glossary

Message             Description

NN'                 Memory scrolling is active (where NN is the memory
                    number)

o                   Shows a pause stored in memory

Alpha or STO        Prompts you to press the "alpha" keys or [STO]

Auto Ansr           Automatic answer

Auto Lock           Automatic lock

A1                  Two-system operation; non-wireline system is active,
                    using phone number 1

A2                  Two-system operation; non-wireline system is active,
                    using phone number 2

B1                  Two-system operation; wireline system is active, using
                    phone number 1

B2                  Two-System operation; wireline system is active, using
                    phone number 2

One Min Timr        Call-time reminder tone

Busy                Master clear in progress

Call                Call now being, or was previously, received

Change?             Memory prompt to caution before overwriting previously
                    stored information

Clear?              Memory prompt to caution before cleaning a memory
                    entry

Emergcy             Emergency call in progress (using [1])

NoNames Stored      No names are stored in memory

Emergcy Call        Emergency dialing display setting (appears with On or
                    Off)

Full                Memory is full or the requested memory block is
                    unavailable

Home                Home system type selected

Indiv Timer         Automatic Timer Function

Keypad Tone         Keypad tone setting

Level (1-6)         Service restriction level

LocCode             Appears before lock code

Lock?               Appears during manual lock procedure

Locked              Phone is locked

Low Bat             Battery power is low

MultKey Ansr        Multiple key answer

Mute                Microphone is turned off

Number Pref         Number display preference function

On                  Appears when display is clear (if signal strength
                    meter is off)

PIN Active          PIN dialing function is on or off
or Inactiv

Redial              Automatic redial in progress

Ring Off            Ringer alert off (appears with Vib off)

Ring On             Ringer alert on (appears with Vib on)

Ring Only           Ring only alert type

Scan A              Non-wireline A system-type selected

Scan AB             A then B scan system-type selected

Scan B              Wireline B scan system-type selected

Scan BA             B then A scan system-type selected

Call RCV            Call screening function

Pref'd SIDs         (System ID) Specific cellular ID required (system
                    type selected)

Signal Mtr          Signal strength meter

Std Setting         Appears during master reset procedure

Std AB              Standard non-wireline system-type selected

Std BA              Standard wireline system-type selected

Turbo Dial          One-touch dialing

Scrpad Tone         Scratchpad tone

Vib Off             Vibration alert off (appears with Ring Off)

Vib On              Vibration alert on (appears with Ring On)

Vibrate Only        Vibration only alert type

(br/SM 2/3/98)