Technophone 900 - AMPS Mobile Telephone
(170-1017)                 Timer Menu - C             Faxback Doc. # 41386

The Timer Menu allows you to access the following functions relating to
timed operations:

  C0   Entry to Security Menu

  C1   Display Last Call Time

  C2   Display/Reset Airtime Meter

  C3   Timed Auto Redial

  C4   1-Minute Alert Tone

  C5   Alarm Clock

To access the Timer Menu from the normal display, press [MU] [MU] [MU].

The descriptions for functions C1 and C5 assume that you have accessed them
directly from the normal display.

Entry to Security Menu (C0)

  Allows access to Security menu, while scrolling in Timer Menu.

NEXT MENU

Press [0 OPR] to access the function from within the Timer Menu.

ENTER PIN CODE

Press [MU], and then enter your 4-digit PIN to enter Security Menu.

SECURITY MENU

Press [END] to exit.

Display Last Call Time (C1)

  Displays the duration of your last call.

LAST 0 1M 14

Press [MU] [MU] [MU] [1 QZ] to access the function.

For example, '01M 14' denotes 1 minute and 14 seconds.

Press [END] to exit.

Display/Reset Airtime Meter (C2)

  Displays the accumulated airtime, and allows the meter to be reset.

AIR TIME 2 M

Press [MU] [MU] [MU] [2 ABC] to access the function.

e.g., '2M' denotes 2 minutes.

To reset airtime meter (i.e., to '0 M'): press [MU].

Press [END] to exit.

Timed Auto Redial (C3)

  Automatically redials a number once, after a defined number of minutes
  has elapsed (1 to 240).

  Tone indicates that redialing has occurred.

REDIAL OFF

Press [MU] [MU] [MU] [3 DEF] to access the function, and display current
status.

To enable the function, e.g., set the timer to 11 minutes.

REDIAL 11 MINS

Press [MU] (the message 'ENTER TIME' appears) then press [1 QZ] [1 QZ] [MU].

To cancel (i.e. select the 'REDIAL OFF' option) press [MU] [MU].

Press [END] to exit.

  You may review the time remaining before auto redial occurs, by pressing
  [MU] [MU] [MU] [3 DEF] again from the normal display.

1-Minute Alert Tone (C4)

  A tone is emitted from the earpiece during incoming and outgoing calls.

  The first tone occurs 50 seconds after the call is established, and then
  the tone occurs 10 seconds before the end of each subsequent minute.

NO ALERT

Press [MU] [MU] [MU] [4 GHI] to access the function, and display current
status.

To select other option ('1 MIN. ALERT ON'/'NO ALERT'): press [MU].

Press [END] to exit.

Alarm Clock (C5)

  The telephone will emit a series of short tones (for approx. 5 seconds),
  at the end of a defined time delay.  The timer may be set for a delay of
  between 1 and 240 minutes.  After the alarm has sounded, the function is
  set to the 'OFF' condition.

ALARM OFF

Press [MU] [MU] [MU] [5 JKL] to access the function and display the current
status.

ALARM IN 20 MINS

To enable (e.g. set to 20 minutes): press [MU] (the message 'ENTER TIME'
appears), then press [2 ABC] [0 OPR] [MU].

To cancel (i.e. set to 'ALARM OFF'): press [MU] [MU].  The alarm is also
canceled if the telephone's power supply is disconnected.

Press [END] to exit.

  You may review the time remaining before the alarm rings, by pressing
  [MU] [MU] [MU] [5 JKL] again from the normal display.

  When the alarm sounds, it can be stopped by pressing any key.



(br/EB 9/2/97)

Privacy Policy