Deluxe Alpha Cellular Telephone
(170-1209) Message Glossary Faxback Doc. # 39873
' (Apostrophe), scrolling activated
o Feature is selected (also indicates a pause in memory)
* How * is displayed when stored in memory
# How # is displayed when stored in memory
ALPHA Alpha Entry is selected
Alt Off Ring Alert canceled
Answer Automatic Answer selected
Armed Theft Alarm selected
Autoloc Automatic Lock selected
A1 Two System Operation (Active system is non-wireline, using
phone number 1.)
A2 Two System Operation (Active system is non-wireline, using
phone number 2.)
Battery Icon Battery Voltage Meter (number of bars indicates relative
level of voltage)
B1 Two System Operation (Active system is wireline, using phone
number 1.)
B2 Two System Operation (Active system is wireline, using phone
number 2.)
Beep One-Minute Beep Timer selected
Busy Master Reset of Master Clear is in progress
C Precedes Cumulative Timer display
Call Shows incoming call (also indicates call in absence)
Change? Memory protect is activated to prevent accidental overwriting
of a memory location
Clear? Memory protect is activated to prevent accidental overwriting
of a memory location
Delayed Delayed Call Placement selected
Emergency Emergency Dialing initiated
Empty Name memory is empty
Emr Off Emergency Dialing cancelled
Fbt Off Keypad Tones cancelled
Full All memory locations are full or requested block is
unavailable
Home System type selection (Home mode)
Level 1 Service level selected
Level 2 Service level selected
Level 3 Service level selected
Level 4 Service level selected
Level 5 Service level selected
Level 6 Service level selected
Loc Precedes unlock code when displayed
Lock? Lock prompt to prevent accidental locking
Locked Unit is locked
Low Bat Low battery
Mute Microphone muted
Name Name-first memory review
On Telephone is on
R Precedes display of Resettable Call Timer
Redial Automatic Redial selected
Y Icon Signal strength meter (SSM) (number of bars indicates relative
signal strength)
Scan A System type selection (scan non-wireline A only)
Scan AB System type selection (scan A type first, then B)
Scan B System type selection (scan wireline B only)
Scan BA System type selection (scan B type first, then A)
Screen Incoming call screening selected
SID System type selection
Std All user features set to standard
Std AB System type selection (non-wireline standard mode)
Std BA System type selection (wireline standard mode)
Timer Automatic display timer selected
TT Off Silent scratch pad selected
Volume Icon Volume meter (number of bars indicates relative volume
level)
Vox Voice operated transmission selected
(km-06/05/1997)
Privacy Policy