ET-545 Cordless Telephone
(430-1045) Troubleshooting Faxback Doc. # 39509
We do not expect you to have any problems with your telephone, but if you
do, the following suggestions might help. If you still have problems,
check other phones on the same line to see if they work properly.
If they do and the problem does not seem to be with your phone service,
take the phone to your local Radio Shack store for assistance.
Problem Solutions
The handset does not work. Be sure POWER is set to ON.
Move the handset closer to the base.
Be sure the phone line cord and
AC adapter are correctly and securely
connected.
Be sure the battery pack is connected and
charged.
Fully extend the base's antenna
vertically.
Return the handset to the base for
5 seconds, then try again.
Volume drops or you hear Someone has picked up another phone on
unusual sounds. the same line. Hang up the other phone.
Call is noisy. Do not place the base near appliances or
large metal objects.
Keep the handset away from interference
sources such as computers, remote control
toys, wireless microphones, wireless
alarm systems, wireless intercoms and
room monitors, fluorescent lights, and
electrical appliances. If the
interference is severe, turn off the
interfering device.
Press CH to switch to another channel.
Hang up and redial the number.
Phone does not dial more Store the local area code
than 7 digits when dialing (see "Preparation," Faxback Doc. # 39507).
from a Caller ID record.
The handset's range Fully extend the base's antenna
vertically.
decreases.
Return the handset to the base to recharge
the battery pack
Be sure the base's antenna is not touching
a metal surface.
Receiver sound flutters Be sure the battery pack is charged.
or fades.
Fully extend the base's antenna vertically.
Move the handset closer to the base.
Can make calls, but Be sure POWER is set to ON.
telephone does not ring.
Telephone company may be using unusual
ringing methods. Your telephone is
designed for standard straight line bridged
ringing.
Can receive calls, but Set TONE/PULSE correctly for the type of
cannot make calls. service you have.
You cannot answer/make a Unplug and plug AC power to reset the
call and the handset sounds automatic security access code.
an error tone when you lift
it from the base or press
TALK.
(br/km-05/14/1997)
Privacy Policy