Meridian 9516 Digital Caller ID Answer Phone
(430-5801)                 Installation               Faxback Doc. # 38929


Connecting the Handset Cord

Attach one end of the handset cord to the handset and the other end to the
handset jack.

Connecting the Line Cord

Attach one end of the line cord to jack number 1 and the other end of the
line cord to the wall jack.

Note:  If you are going to wall mount your Meridian 9516, use the 20 cm 
       (8") line cord supplied with your telephone.

Connecting an Optional Fax Machine or Modem

Attach the line cord to jack number 2 and the other end to the modem or
fax machine.  This line cord is not supplied with the telephone.

Connecting the Power Adaptor

Attach the power adaptor to the base of the telephone where the warning
symbol is marked.  Connect the power adaptor into the closest electrical
outlet.

Important!

To avoid potential electrical shock hazard to personnel or damage to the
telephone, use only the manufacturer supplied equipment and installation
procedures.  Specifically use only 4 conduct modular teladapt plug/cords
with this product, and the AC transformer must be CSA/UL or CSA-NRTL/C
approved Class 2 level C, rated.  Substitution of non approved equipment
will void the Northern Telecom warranty.

Checking your Telephone

When you first plug in your Meridian 9516, the telephone initializes itself
and then you may see a message asking you to make a language selection.
Follow the directions on the display to select one of two languages.

Your telephone also runs a test to ensure that the line cord is connected
properly.  If the test fails, the display prompts you to check the line
cord.  Make sure that all connections are fastened securely.


Desk Mounting

Lower the stand into the slots on the base of the telephone.  Slide the
stand back until it clicks into the locked position.

Optional Wall Mounting

Lower the stand into the slots on the base of the telephone.  Slide the
stand back until it clicks into the locked position.

Adjusting the Display

Place your Meridian 9516 on a table or hang it on a wall, then adjust the 
display.

Note:  The Load Number (LN) is 14 and the Ringer Equivalence Number (REN)
       is 1.4B for the Meridian 9516 telephone.  Please see the base of 
       your telephone or the Regulations sheet for more regulatory and
       safety information.

(km-04/28/1997)

Privacy Policy