Nokia 2160
(170-1207)                 Data and Fax Calls         Faxback Doc. # 38712


    The phone can send or receive data when it is connected to a
    compatible data terminal (such as a fax machine or PC) through a data
    adapter.  See the documentation for the data adapter and terminal.

    Only analog data can be sent and received.

    The phone recognizes the type of the connected terminal automatically.
    For instance, if a fax machine is connected to the phone, the phone
    makes a fax call.

    Note:

    Pressing and holding 9 to initiate an emergency call does not work
    when the phone is connected to a modem.

To start an outgoing data or fax call

1.  Check that the data terminal is properly installed.  A data or fax
    transmission is always started from the data terminal.

2.  Start the transmission from the data terminal in the normal way.
    For example, to send a telefax, start the transmission from the fax
    machines keypad.  The phone calls the number you dialed from the
    terminal's keypad.

3.  After the transmission, end the call from the data terminal, or press
    (END).

To receive a data call

1.  Check that the data terminal is properly installed.

2.  Press (SND) to answer the call.  OR, if you know that the incoming
    call is a data call, you can answer the call from the data terminal.

3.  After the transmission, end the call from the data terminal, OR, press
    (END).

To receive a fax call

1.  Check that the data terminal is properly installed.

2.  Press (SND) to answer the call.  OR, if you know this is an incoming
    fax, you can answer the call from the fax machine's keypad.

3.  After the transmission, end the call from the fax machine's keypad.
    OR, press (END).

(br/km-04/02/1997)

Privacy Policy