CT-460 Hands-Free Cordless Telephone
(430-1060)                 Quick Start                Faxback Doc. # 38250

While the following instructions will provide a basic understanding of the
installation and operation of the CT-460 phone, please refer to the user
guide for more detailed information and important safety instructions.

ATTACHING THE TELEPHONE LINE CORD AND AC ADAPTER

Connect the telephone line cord to the telephone jacks in the base unit and
wall. Connect one end of the AC adapter to the base unit and plug the other
end into a standard electrical outlet (110 VAC, 60 Hz).

POSITIONING THE BASE UNIT ANTENNA

Fully extend the base unit antenna and adjust it to a vertical position.

INSTALLING AND CHARGING THE BATTERY PACK

Open the battery compartment and plug the battery pack lead into the remote
pack connector.  Place the battery pack inside the remote and close the
battery compartment.

Place the remote pack into the cradle of the base unit and verify that the
charge indicator on the base unit has turned on.  Before using the CT-460
phone for the first time, let the battery pack charge for 12 hours.

SELECTING AND ATTACHING A NOISE CANCELING HEADSET

Based on your headset preferences, select either the earbud style or
headband style of headset.

Plug the connector of the selected headset into the remote pack.

POSITIONING THE EARBUD HEADSET

Place the receiver and the circular portion of the cushion inside the ear.
Gently push the stabilizer into the upper ear cavity.

Adjust the headset boom so that the microphone is directed toward the corner
of the mouth.

POSITIONING THE HEADBAND HEADSET

Adjust the headband to the appropriate length.  Carefully bend the metal
section of the headband for a tighter or looser fit.

Place the receiver so that it is centered over either ear.  Position the
headband pad so that it is positioned ABOVE and not ON the ear.

Adjust the headset boom so that the microphone is directed toward the corner
of the mouth.

WEARING THE REMOTE PACK

The remote pack may be worn in a shirt pocket, on a belt using the holster
belt clip, or around the neck using the neck strap.

MAKING AND ANSWERING CALLS

Switch the ringer control on the remote pack to the ON position.  Turn the
remote pack on by pressing one of the ON/OFF keys.  After hearing a dial
tone, dial a phone number.  Press one of the ON/OFF keys to end your call.

When the remote pack and/or the base unit rings, put on the headset and
answer the call by pressing one of the ON/OFF keys.  Press one of the
ON/OFF keys to end your call.


(br/EB 12/11/96)

Privacy Policy