NOKIA 232
(170-1086)                  Reference Information      Faxback Doc. #36967


REFERENCE INFORMATION

LIST OF DISPLAY MESSAGES

AUTO PWR OFF

Phone is installed in a car kit with ignition sense connected.  When
ignition is switched off, this message appears, and the phone will switch
off automatically in 5 seconds.

BATTERY LOW

Appears when battery charge is down to approximately 5% then every
5 minutes if phone is in standby mode, or every minute if it is in a call.

CALL

Indicates that you are receiving a call, or have not answered an incoming
call.

ALL IN PROGRESS

Appears if you try to change from one cellular network to another in mid
call.

CODE ERROR

Indicates that you have entered an invalid lock code or security code.

DATA ACTIVE

The phone is in data mode.

EMPTY

Displayed when you try to recall information from an empty memory
location.

KEYGUARD ACTIVE

The keyguard function is switched on.

KEYGUARD OFF

The keyguard function is switched off.

LOCATION FULL

The memory location to which you are trying to move information is already
occupied.

LOCK CODE?

Enter your 4-digit lock code (default 1234).

LOCKED

The phone is locked.

MOVE NAME?

Displayed if you are trying to store a name which already exists, or are
moving stored contents which include a name.

NAM ERROR

The NAM contains erroneous data; contact your dealer.

NAME?

Enter a name (you have selected alpha mode).

NAME TOO LONG

The name you have entered will not fit completely in the memory location
and will be truncated (press STO again to accept the shortened name).

NEW CODE?

Enter a code.

NONE PRESENT

There are no accessories connected to the phone.

NO CALL ACTIVE

Data mode cannot be used as there is no call in progress.

NO ROOM FOR NAME

The associated number in the selected memory location is too long to allow
space for a name (Press STO again to proceed).

NO SERVICE

Appears if you try to make a call when no cellular service is available.

NO SPACE

Indicates that all memory locations are full.

NOT ALLOWED

Indicates that you have tried to store a number in an invalid memory
location (eg, 00) or call a barred number.

NOT FOUND

Indicates that the name you are trying to recall does not exist.

PRESS "MENU" AND NOW TYPE "*"

A key was pressed while keyguard was active; to switch off keyguard, press
MENU then *.

RECALL

Prompts you to enter the desired memory location number, when wishing to
recall information form the memory.

RECHARGE BATTERY

Appears for 10 seconds before the phone switches off automatically.

REPLACE CONTENT?

Indicates the memory location in which you are trying to store is already
in use.

SECURITY?

Enter the security code (default (12345).

SILENT

Indicates that the ringing tone is switched off (i.e. `SILENT SERVICE'
option is selected).

SID SCRN BARRED

(NO flashes, SVC steady)
No service is available due to SID function (Menu 18).  To attempt to
regain service, set SID SCRN to OFF.

STORE

Prompts you to enter a memory location number, when storing or deleting
contents.

STORE NOT DONE

Indicates that you chose not to store new information in a memory location
that was already occupied.

STORED

Indicates that storing to memory was successful.

TIMERS CLEARED

Indicates that call timers have been set to zero.

UNLOCKED

The phone has been unlocked.

USE /\ \/ TO VIEW

Indicates that you have entered the menu; press /\ or \/ to scroll the
functions.

VOLUME 1

Indicates the earpiece volume level selected.

LIST OF TONES

Ringing Tone:

    This denotes an incoming call.  The tone volume can be selected using
    Menu 6, and the ring-tone type can be selected using Menu 2.

Keypress Tone:

    This (single) tone denotes a valid keypress.

Re-order Tone:

    This (triple) tone indicates that your attempt to originate a call was
    unsuccessful (eg, the network was busy) or your call has been
    terminated for some other reason.

Low Battery Tone:

    This (single) tone denotes that the remaining battery charge is low.
    The BATTERY LOW message is displayed at the same time.  The tone
    sounds every 5 minutes if phone is in standby mode, or every minute if
    in a call.

Recharge Battery Tone:

    This (Triple) tone denotes that battery charge is extremely low, and
    that the phone will no longer operate.  The RECHARGE BATTERY message
    is displayed at the same time.  The phone will switch off
    automatically within 10 seconds.

Charger-connected Tone:

    This tone (single beep) denotes that a charger has been connected;
    charging may start.  The tone will be heard even when phone is
    switched off.

Auto Power-off Tone:

    In a car kit equipped with ignition sense, this tone denotes that the
    power will be switched off automatically.  The AUTO PWR OFF message is
    displayed at the same time.

Error Tone:

    This (long) tone indicates that cellular service cannot be obtained
    (e.g. you are not within the service area).  In a car kit equipped
    with ignition sense, the tone denotes that the phone will switch off
    automatically in 5 seconds.

(BR/rg-12/09/96)

Privacy Policy