Ericsson DH 318 Digital Cellular Phone
(170-1201)                 Using Menus                Faxback Doc. # 35278

Using Menus

This section explains how to use your phone's menus.  You should read this
section thoroughly and familiarize yourself with the menus, how to navigate
through them, and how to change settings.  Those steps are described here.
Following sections describe each of the menus and the settings available.

Your phone's menus are an easy way for you to:

  Store and recall numbers in memory

  check text messages and voice mail

  Set up call features

  Change ring tone and other sound settings

  Change other settings for your phone.

Opening Menus

To open the main menu, press MENU/ \/.  The words Main Menus and the names
of the first two submenus are shown in the display. Pressing NO/ON/OFF when
the main menu is shown in the display takes your phone out of menu mode.

To open one of the submenus:

1.  Press MENU/ \/ or RCL/ /\ to scroll through the list of submenus.

2.  When the menu pointer (>) is beside the submenu you want to open, press
    YES.  The list of settings for the submenu are shown in the display.

3.  You can scroll through the list of settings by pressing MENU/ \/ or
    RCL/ /\.

4.  To back up to the list of submenus, press NO/ON/OFF.

Pressing NO/ON/OFF from a list of submenu settings returns you to the main
menu list.

Changing Settings

Open the menus as previously described, then:

1.  Press MENU/ \/ or RCL/ /\ to scroll through the list until the menu
    pointer is beside the setting you want to change.

2.  Press YES.  The choices available for the setting are shown in the
    display.  The currently active choice is enclosed in brackets.  Some
    settings have two choices such as ON and OFF for the Speed Dial setting
    in the Call Setup menu.  Other settings have a list of choices, such as
    the Ring Tone setting in the Sounds menu.

3.  Press MENU/ \/ or RCL/ /\ to scroll through the list of choices until
    the menu pointer is beside the choice you want. If the setting has only
    two choices, press either of these keys to switch between the two
    choices.  The active choice is enclosed in brackets.

4.  Press YES to store the choice you selected. The words SELECTION STORED!
    are shown briefly in the display. The list of settings is then shown in
    the display.  If you want to exit the list of choices without storing
    any changes you have made, press NO/ON/OFF.  The list of settings is
    shown in the display.

Exiting Menu Mode

Pressing NO/ON/OFF at any menu level takes you back one level. To exit Menu
mode, continue pressing NO/ON/Off until the standby display is shown.

NOTE:  If your phone receives a call while it is in Menu mode, it automatic-
       ally exits menu mode to allow you to answer the call.

   ____\
  | Hint >  To quickly access submenus and setting choices, if you know the
       /    number associated with the submenu and setting you want to
            change, you can press MENU/ \/ followed by the number of the
            submenu and then the number of the setting.  For example, you
            want to change the sound the keys on your phone make when you
            press them.  If the Sounds submenu is number 6, and the Key
            Sounds setting is number 3, then you could press MENU/ \/, then
            6, then 3 to go directly to the choices for Key Sounds.

Examples of Using Menus

Turning Minute Minder ON

1.  Press MENU/ \/.  The Main Menus list is shown in the display.

2.  Press MENU/ \/ or RCL/ /\ until the menu pointer (>) is beside Call
    Setup.

3.  Press YES.  The Call Setup menu settings are shown in the display.

4.  Press MENU/ \/ or RCL/ /\ until the menu pointer is beside MinuteMind.

5.  Press YES.  The choices for Minute Mind (ON and OFF) are shown in the
    display.

6.  Press MENU/ \/ or RCL/ /\ until [ON] is enclosed in brackets.

7.  Press YES.  SELECTION STORED! is shown briefly in the display, then the
    settings list for the Call Setup menu is shown.

8.  Press NO/ON/OFF twice to exit Menu mode.

Changing the volume of the Ring Tone

1.  Press MENU/ \/.  The Main Menus list is shown in the display.

2.  Press MENU/ \/ or RCL/ /\ until the menu pointer (>) is beside Sounds.

3.  Press YES.  The Sounds menu settings are shown in the display.

4.  Press MENU/ \/ or RCL/ /\ until the menu pointer is beside Ring Volume.

5.  Press YES. The list of choices for Ring Volume are shown in the display.

    Off

    High

    Escalating

    Medium

    Low

6.  Press MENU/ \/ or RCL/ /\ until the menu pointer is beside the Ring
    Volume choice you want.  As you scroll through the choices, the phone
    sounds the ring volume for each choice.

7.  Press YES to store your choice.  SELECTION STORED! is shown briefly in
    the display, then the Sounds menu settings are shown.

8.  Press NO/ON/OFF twice to exit menu mode.

Menu Overview

The following chart shows the menus and settings for your phone.

Memory

    Store Mem

    RCL Mem

    Store Scrpd

    RCL ScrPad

    RCL Last No

    Memory Used

Services

    Read Msg

    Voice Mail

    Privacy

    Time/Date

    System Opt

    Man.Select

    System Type

    Phone No.

    Call Type

    System Info

Gen. Setup

    Key pad Lock

    Back Light

    Contrast

    Greeting

    Language

    Menu Reset

    Noise Canc*

    Echo Canc*

    Training*

Call Setup

    Super Dial

    Speed Dial

    Answer Opt

    Call Timer

    Minute Mind

    Auto Area

    Auto Prefix

    Auto Retry

    Tone Send

    Access Tone

Sounds

    Silent Mode

    Msg Tone

    Key Sound

    Key Volume

    Ear Volume

    Speaker Vol

    Ring Pulse

    Ring Pitch

    Ring Volume

Call Data

    Receive Log

    Last Time

    Elapsed

    Call Count

    Time Count

Locks

    Auto Lock

    Dialing

    Call Cards

    Receiving

    Sec.Code

Call Cards

    Card Select

    Card 1 Setup

    Card 2 Setup

These menu items are available only when your phone is being used in a
vehicle handsfree accessory.


(BR/EB 10/25/96)

Privacy Policy