Ericsson DH 318 Digital Cellular Phone
(170-1201)                 Setup                      Faxback Doc. # 35273

About This Manual

Please read this manual thoroughly before attempting to use your phone.
This manual is divided into the following sections.

Important Safety Information describes safety factors for using electronic
products.

Guidelines for Safe and Efficient Use describes important information for
using your phone.

Battery information contains useful information about rechargeable
batteries.

Getting Started tells you what you need to know to get your phone out of
the box and ready to make calls.

Learning About Your Phone describes the parts of your phone to help you get
familiar with its operation.

Basic Operations gets you started using your phone by describing operations
such as placing calls, answering calls, speed dialing, volume control, and
microphone muting during a call.

Storing and Recalling Phone Numbers describes how to use the memory features
of your phone.

Message Services describes how to use the test message and voice mail
features of your phone.

Using Menus describes how to access and navigate through menus.

Menu Descriptions describes the menus and settings available on your phone.

Problems You Can Solve provides an easy-to-use trouble shooting table if
you should encounter problems using your phone.

The following descriptions will help you understand the information
presented in this manual.

Names of keys - Key names are shown in bold type.  CLR, for example. Some
keys have more than one function.  When the name of a multiple function key
is used, the function which is being referred to is shown in bold type. For
example, "Press NO/ON/OFF to end a call". 

Any text or numbers in text which represent something shown on the phone
display are shown in a typeface similar to the characters used in the phone display. Home 1, for example.

    ____\
   | Hint >
        /

Hint arrows point to tips and information about using your phone.

Illustrations of phone displays shown in this manual are examples which
approximate what is shown in the phone display.  What is actually shown in
your phone display may sometimes vary slightly from what is represented in
the illustrations.

Getting Started

Complete the following steps after you have removed your phone and its
components from the box:

  Charge the battery (see Faxback Doc. # 35272)

  Attach the antenna to the phone

  Attach the belt clip to your battery

  Attach the battery to your phone (see Faxback Doc. # 35272)

Attaching the Antenna

1.  Insert the gold pin on the end of the antenna into the antenna connector
    located on the top of the phone.

2.  Press the pin into the connector and rotate the antenna until the
    antenna clicks and locks in place.  You should not be able to easily
    rotate the antenna after it locks in place.

Attaching The Belt Clip to the Battery

DO NOT try to remove the belt clip after you have attached it to a battery.
Trying to remove the belt clip could damage the battery case.  Insert the
flat metal tab on the belt clip into the slot in the battery case.  You
should hear the belt clip click when it locks in place.

Attaching the Battery to Your Phone

Attach the battery to your phone as instructed in Faxback Doc. # 35272.
Removing the battery is the reverse of attaching it to the phone.


(BR/EB 10/25/96)

Privacy Policy