ET-537 25-Channel Cordless Telephone with 9-Number Memory
(430-1037)                 Preparation                Faxback Doc. # 35023

SETTING THE DIALING MODE

Set TONE/PULSE on the back of the base for the type of service you have -
tone or pulse (rotary).  If you are not sure which type you have, do this
test.

1.  Set TONE/PULSE to TONE.

2.  Lift the handset, press TALK, and listen for a dial tone.

3.  Press any number other than 0.

    NOTE:  If your phone system requires that you dial an access code (9,
           for example) before you dial an outside number, do not enter the
           access code.

If the dial tone stops, you have touch tone service.  Leave TONE/PULSE set
to TONE.

If the dial tone continues, you have pulse (rotary) service. Set TONE/PULSE
to PULSE.

TURNING THE RINGER ON OR OFF

To turn off the handset's ringer, set RINGER OFF/ON on the handset to OFF.
To turn on the ringer, set it to ON.

NOTE:  With the handset's ringer off, you can still make calls using the
       phone.  And you can receive calls if you have another telephone on
       the same line which rings when there is an incoming call.


(BR/EB 10/8/96)

Privacy Policy