CT-356 Cellular Phone w/40 Number Memory 
(170-1070)                 Services and Options       Faxback Doc. # 34408


USING TOUCH TONE SERVICES

To use your cellular phone to control answering machines and special
telephone services (such as bank-by-phone or voicemail), simply enter
touch-tone commands using your phone's keypad after the service answers.

Or, you can store the service's command sequence in a memory location,
then follow these steps after the service answers.

1.  Recall the memory location that contains the command sequence.

2.  Press MENU then SEND.  The phone sends the commands as touch tones.


Adding a Pause

Some services, such as voicemail, require you to enter an access code
then pause before entering additional digits.  To include a pause in
a sequence when storing it in memory, press MENU the #.  The phone
displays p.  When you send the sequence, the phone pauses for 2 1/2
seconds where you entered a pause.  If you need a longer pause,
enter multiple pauses, one after the other.


Adding a Wait

If you do not know in advance how long you must wait before sending
additional commands, insert a wait in your sequence by pressing MENU
# # at the appropriate place.  The phone displays w.  When you send
the sequence, the phone waits for you to press SEND before it sends
the rest of the stored sequence.


SPECIAL PHONE SERVICES

Your cellular services provider might offer special options that let you
receive or make a second call or conference two calls together using your
phone's SEND key.

Contact your cellular service provider for additional details about
these special services or billing.


PIN CODE DIALING

For security, some cellular service carriers require you to dial a
personal identification number (PIN) in addition to the phone number
each time you place a call.  This is sometimes referred to as "PIN
code dialing."

NOTES:  This service is not required (or available) on all networks.
        Check with your local service provider.

        If you subscribe to this service, a PIN code is assigned or
        selected at the time you activate your phone.

If you subscribe to PIN code dialing with your cellular carrier, you can
store the PIN code into your phone's memory and set the phone to
automatically send the code at the press of a button when you place
a call.

Follow these steps to program your PIN code and turn PIN Code dialing on
or off.

1.  Enter * # 7 PQRS 4 GHI 6 MNO 2 ABC 2 ABC 5 JKL
    5 JKL # (this spells * # PIN CALL #).

    The phone prompts for your PIN code (PIN CODE?)

2.  To store your PIN code in the phone's memory and turn on PIN code
    dialing, enter your PIN code (maximum of 4 digits), then press STO.
    PIN CALL ON appears briefly.

    To turn off PIN code dialing, simply press STO without entering a
    number.  PIN CALL OFF appears briefly.

When PIN code dialing is set to ON, WAIT FOR PROMPT appears after you
press STO to place a call.  When you hear the tone, press SEND again
to automatically dial your stored PIN code and complete the call.

NOTES:  When PIN code dialing is set to ON, you can place a call to the
        emergency number programmed into your phone (as usual) without
        sending the PIN code.

        If you place a call using a cellular service that does not support
        PIN code dialing (and PIN code dialing is set to ON).  WAIT FOR
        PROMPT appears, but the call is connected without your PIN code.
        WAIT FOR PROMPT disappears after you end the call.

(LB/km-03/10/1997)

Privacy Policy