Headset Cordless Telephone 
(430-0569B)                 Installation              Faxback Doc. # 19221

SELECTING A LOCATION

You can place the phone's base on a desk, shelf, or table.  Select a
location that meets the following requirements:

    Near an AC outlet

    Near a modular phone line jack

    Out of the way of normal activities

    Away from electrical machinery, electrical appliances, and metal walls
    or filing cabinets

    Away from wireless intercoms, security alarms, and room monitors

The base’s location affects the phone’s range.  If you have a choice of
several locations, try each to see which one provides the best performance.

If the phone line jack is not a modular jack, you must update the wiring.
You can convert the wiring yourself, using jacks and adapters available at
your local Radio Shack store.  Or, you can let the phone company update the
wiring for you.

NOTE:  The phone company will charge you for the installation of the
       necessary jack.  The phone company will ask you for the USOC number
       of the jack to be installed.  This number is RJ11C.

CONNECTING THE PHONE

After you select a location for the phone’s base, follow these steps to
connect it to AC power and to the phone line.

1.  Plug one end of the supplied modular cord into the phone line jack on
    the back of the phone’s base.

2.  Plug the modular cord’s other end into a modular phone line jack.

3.  Insert the supplied AC adapter’s barrel plug into the DC 12V jack on
    the back of the phone’s base.

4.  Plug the adapter into a standard AC outlet.


(EB 1/9/96)

Privacy Policy