ET-501 Cordless Telephone
(430-1004)                 Installation               Faxback Doc. # 18697

SELECTING A LOCATION

You can place our ET-501's base on a desk, shelf, or table.  Select a
location that meets these requirements:

    Near an AC outlet

    Near a telephone line jack

    Out of the way of normal activities

    Away from electrical machinery, electrical appliances, and metal walls
    or filing cabinets

    Away from wireless intercoms, alarms, and room monitors

The base's location affects the phone's range.  If you have a choice of 
several locations, try each location to see which one provides the best
performance.

If the phone line jack is not a modular jack, you can update the wiring
yourself, using jacks and adapters available at your local Radio Shack
store.  Or, you can let the phone company update the wiring for you.

NOTE:  The phone company will charge you for the installation of the 
       necessary jacks.  The USOC number of the jack to be installed is
       RJ11C for a baseboard jack.

Placing the Base On a Desk Top

Follow these steps when you place the base on a desk, shelf, or table.

1.  Plug the end of the modular cord into a modular phone jack.

2.  Plug the AC power cord into a standard AC outlet.

3.  Place the handset on the base.


(CS 12/5/95) 

Privacy Policy