Technophone 901
(170-1015)                 Volume Menu                Faxback Doc. # 17781

The Volume Menu allows you to access the following functions affecting
sounds generated by the telephone's operation:

    B0      Entry to Timer Menu

    B1      Ringing Volume

    B2      Keytone Volume

    B3      DTMF Options

    B4      Horn Alert

    B5      Auto Answer

To access the Volume Menu from the normal display, press MU MU.

ENTRY TO TIMER MENU (B0)

Allows access to Timer Menu, while scrolling in Volume Menu.

NEXT MENU

Press 0OPR to access the function from within the Volume Menu.

TIMER MENU

Press MU to enter Timer Menu.

Press END to exit.

RINGING VOLUME (B1)

Selects one of four ring volume levels, or selects ringing off (silent
ringing causes only the telephone's illumination to flash when the
telephone rings).

May be set to 'QUIET', 'MEDIUM', 'LOUD', 'V(ery) LOUD' or 'OFF'.

RING VOL LOUD

Press MU MU 102 to access the function, and display current status.

    Press MU to move to the next volume level.

    Press END to exit.

KEYTON VOLUME (B2)

Selects, and demonstrates, the volume level of tone emitted when any key is
pressed.

May be set to 'QUIET', 'MEDIUM', 'LOUD', V(ery) LOUD' or 'OFF'.

KEY TONE MEDIUM    Press MU MU 2ABC to access the function, and display
                   current status.

                   To select another level press MU.

                   Press END to exit.

DTMF OPTIONS (B3)

DTMF tones may be sent during a call (e.g., to interrogate bank accounts or
telephone answering machines).

Continuous DTMF tones are normally sent but standard length DTMF tones may
be sent if desired.

This function allows you to select the length of the DTMF tones:

    Standard:      Standard-length tones will be sent.

    Continuous:    Tones will be sent for as long as each respective digit
                   key is held down.

Press MU MU 3DEF to access the function, and display current status.

To select another option (see below) press MU.

    Displayed option   Duration of DTMF tones

    'DTMF Std.'        Standard

    'DTMF CONT.'       Continuous

    Press END to exit.

When in a call, DT MF data can be sent in two ways:

1.  By entering digits:

    With a normal display showing, press the digits required.  Each digit
    is sent as it is displayed.

2.  By recalling a memory location:

    The digits stored in any memory location can be sent, by pressing RCL
    and then the digits of the memory location number (e.g., for location
    16, press 102 6MNO).  All the digits displayed are then sent
    automatically.  Using this method, only standard length tones are sent
    regardless of the DTMF Options setting.

When in a call, you may access the Memory (using STO or RCL) or the Menus
(using MU) and then use the dialing keys, including #EZ2 and *EZ1, without
causing any DTMF tones to be sent.

The microphone is muted when DTMF tones are being sent.

HORN ALERT (B4)

Operates only if horn-alert wiring is connected.

Provides an external alert (e.g., from car horn or headlights) of incoming
call, when ignition is off.

When activated, the alert sounds or flashes 10 times.

Alert stays active for 4 hours after it has been selected.

Ignition must be off in order to enable Horn Alert.

HORN ALERT ON

Press MU MU 4GHI to access the function, and display current status.

    The HORN indicator illuminates when Horn Alert is selected.

    To select other option ('HORN NO ALERT/'HORN ALERT ON') press MU.

    Horn alert is also canceled by switching ignition on, or by switching
    telephone off and on.

    Press End to exit.

Set to 'HORN NO ALERT' if function is not required.

AUTO ANSWER (B5)

Auto Answering causes the telephone to ring three times when an incoming
call is received; the telephone then answers the call automatically.

The ringing tone consists of three short warbling tones (distinguishing it
from normal ringing).

Auto Answering is available with Mobile Telephones when the vehicle
ignition is on.

NO AUTO ANSWER

Press MU MU 5JKL to access the function, and display current status.

To select other option ('AUTO ANSWER'/NO AUTO ANSWER'):  press MU.

Press END to exit.


(br/all-11/08/95)

Privacy Policy