Ericsson AH 210 Cellular Flipfone
(170-1064) Troubleshooting Faxback Doc. # 15092
NO POWER TO THE TELEPHONE
If the telephone does not come on when you hold down the END key, recharge
or replace the battery.
SIGNAL IS WEAK
If no signal strength indication is shown on the display, move the
telephone to obtain a stronger signal. A reading of at least 1 bar should
be indicated. The maximum reading is 5 bars.
Large obstacles such as buildings, hills and mountains can drastically
affect the signal strength and you may have to move to obtain a
sufficiently strong signal.
Indoors, it is usually best to use the telephone near a window.
Roaming is a cellular service feature that allows you to obtain service in
a system other than your home system (the cellular system supplier to
which you subscribe).
When roaming, (travelling between different geographic regions or call
areas) you may still use your cellular telephone, provided cellular system
support is provided. This will be indicated by the presence of the \/
(ROAM) indicator as well as either "ROAM-A" or "ROAM-B" in the display.
YOU CANNOT PLACE A CALL
The telephone may not be in service or the signal is weak.
The cellular system you are using requires or does not allow the phone
number to be preceded by a "1" or the area code. Try various
combinations or contact the operator for more information.
You are roaming and the cellular system you are using does not have a
roaming agreement with your home system. If there is another cellular
system available, you can attempt to use it by directing the operation
from one system to another using (5) SYSTEM SELECTION in the Menu
Functions, or you can contact the operator to establish service.
NOTE: Most operators can be reached by calling 611 or *611 from your
cellular phone. If the operator cannot be reached, see your
cellular service supplier for the number.
FOR TECHNICAL ASSISTANCE OR YOUR NEAREST SERVICE CENTER CALL
1-800-227-3663 Option Number 4.
(ALL/ir-04/10/96)
Privacy Policy