12-255, 7 Channel SAME Weatheradio: Enabling/ Disabling Alert Tones

In this tutorial, you will be shown how to turn on and off the alert tones programmed in your Weatheradio. For example, you can turn off the alert tone for a VOLCANO WARNING if you do not live near a volcano.

Note: The Weatheradio still detects and displays the information even after you disable the tone for those alerts. You can set the Weatheradio so it does not sound an alert tone during these types of alerts:

Warnings
Avalanche	Blizzard
Flash Flood	Volcano
Winter Storm	Coastal Flood
Flood	High Wind
Special Marine

Watches
Flash Flood	Coastal Flood
Flood	Avalanche
Volcano	Winter Storm
High Wind	Hurricane
Severe Thunderstorm

Statements
Flood	Severe Weather
Special Weather	Flash Flood
Hurricane	Unknown

Other
Required Monthly Test	Practice/Demo

For additional information on this product, see the links below:

Step 1: Entering Program Mode

To enable or disable alert tones, while the clock appears, press MENU. TEMPERATURE appears in the display.

Step 2: Selecting Weatheradio

12-255, display/weatherradio, keypad/up & down arrows

Press the UP or DOWN arrow keys until WEATHERADIO appears on the display.

Step 3: Selecting Weatheradio Options

12-255, display/select ch, keypad/right arrow

Press the RIGHT arrow key. SELECT CH will appear on the display.

Step 4: Selecting TONE DEFEAT

12-255, display/tone defeat, keypad/right arrow

Repeatedly press the UP or DOWN arrow keys until TONE DEFEAT appears on the display.

Step 5: Selecting Alert Types

12-255, display/warning, keypad/right arrow

Press the RIGHT arrow key. WARNING appears on the display.

Step 6: Selecting WATCH

12-255, display/watchm, keypad/up & down arrows

Repeatedly press the UP or DOWN arrow keys to choose through WARNING, TEST, STATEMENT, and WATCH on the display. In this tutorial, we are selecting WATCH. The tables above correspond with each alert type and what will follow on the display when you choose one of the alert types.

Step 7: Selecting Avalanche Watch

12-255, display/avalanche-watch, keypad/right, up & down arrows

After you have selected an alert type, press the RIGHT arrow key. AVALANCHE WATCH will flash on the display if you have chosen WATCH. A beep sounds. Press the UP or DOWN arrow keys to select the alert. In this tutorial, we stayed with the first alert (AVALANCHE WATCH).

Step 8: Enabling or Disabling Alert Tones

12-255, display/tone off, keypad/right arrow

Press the RIGHT arrow key. TONE OFF will appear on the display.

Step 9: Selecting TONE ON

12-255, display/tone on, keypad/up & down arrows

Press the UP or DOWN arrow keys to select either TONE ON or TONE OFF, depending on whether or not you would like to get a warning for this type of alert.

Step 10: Selecting Additional Alert Types

12-255, display/coastal-flood-watch, keypad/right arrow

Press the RIGHT arrow key to confirm your selection. A beep sounds. The Weatheradio will automatically go to the next type of alert in the WATCH category. COASTAL FLOOD appears on the display.

Step 11: Exiting Alert WATCH Mode

12-255, display/watch, keypad/left arrow

If you are finished making all your selections in the WATCH category, press the LEFT arrow key to return to the previous menu category. WATCH appears on the display again. Repeat Steps 6-11 for each alert type.

Step 12: Exiting Programming Mode

Once you have made all your selections for each alert type, press MENU to exit. The clock appears on the display again.