Talking Indoor/Outdoor Thermometer
(630-1028A)                Operation                  Faxback Doc. # 63654

The thermometer automatically measures the outdoor and indoor temperature 
and updates its display every 60 seconds.  Each time you press a button on 
the thermometer, however, the thermometer updates the temperatures every 
10 seconds for the next 4 minutes.  Then it resumes the 60 second cycle.

Displaying/Announcing the Temperature

Set IN/OUT to IN to display the current indoor temperature.  The 
thermometer says "indoor" if the volume is turned on.  Set IN/OUT to OUT 
to display the current outdoor temperature.  The thermometer says 
"outdoor". To hear the thermometer announce the current outdoor and indoor 
temperatures, press TALKING.   

Note: If _ _ _ _ _ Degrees F or _ _ _ _ _ Degrees C appears, this means
      that the temperature has exceeded or fallen below the thermometer's
      measurement range.  When the temperature returns to within the
      measurement range, the display returns to the current temperature
      display.

Changing the Degree Format

You can view the temperature in Fahrenheit (Degrees F) or Celsius (Degrees 
C) format on the thermometer.

To change the degree format for both the indoor and outdoor displays, 
slide Degrees C/Degrees F on the back of the thermometer to the desired 
setting.

The thermometer says "Celsius" when you select Degrees C and "Fahrenheit" 
when you select Degrees F>

Adjusting the Volume

Your thermometer has three voice announcement settings: high, low and off.

To set the volume, repeatedly press VOLUME on the back of the thermometer 
until ||| (high) or || (low) appears, or until || disappears (off). If you 
set the volume to high, the thermometer beeps 3 times. If you set the 
volume to low, the thermometer beeps twice.

Using the Temperature Alarm

You can set the thermometer to sound an alarm when a set low (minimum) or 
high (maximum) temperature is reached indoors or outdoors.

The thermometer is preset to sound an alarm when the temperature reaches 
32 degrees F (0 degrees C) minimum and 100 - 100.4 degrees F (37.7 - 38 
degrees C) maximum depending on the temperature format.

Note: When degrees C/degrees F is set to degrees F, the minimum
      temperature appears as 32 degrees F (0 degrees C), while the maximum
      temperature appears as 100 degrees F (37.7 degrees C).

Viewing the Current Alarm Setting

To view a maximum or minimum temperature alarm setting, repeatedly press 
MODE until the setting you want (see the following chart) appears.

Changing the Alarm Settings

  You See     Meaning

  IN MIN      Minimum indoor temperature
  IN MAX      Maximum indoor temperature
  OUT MIN     Minimum outdoor temperature
  OUT MAX     Maximum outdoor temperature

1.  Repeatedly (if necessary) press MODE to select the setting (IN MAX, IN
    MIN, OUT MAX, or OUT MIN) you want to change.

    The thermometer announces the selected setting and the temperature,
    then beeps once.

2.  Repeatedly press or hold down UP or DOWN to select the desired
    temperature setting.

3.  Repeatedly press MODE until the current temperature appears.

To clear all indoor and outdoor maximum and minimum temperature alarm 
settings, use a sharp object such as a straightened paper clip to press 
RESET on the back of the thermometer.  The thermometer beeps three times 
and -188.8 appears, then the current temperature appears.

Setting the Alarm

The thermometer sounds an alarm when either the indoor or outdoor 
temperature goes above or below the temperature alarm setting.

To turn on the alarm, press ALARM ON/OFF.  The thermometer says "alarm on" 
and (thermometer symbol) appears.  When the temperature exceeds either the 
minimum or maximum temperature alarm setting, the thermometer beeps four 
times and announces the corresponding temperature alarm for one minute 
then repeats the 1-minute announcement twice every 3 minutes.  
(thermometer symbol) and (IN) or (OUT) continuously flash.

To silence the alarm, press any button.  The alarm sounds again the next 
time the temperature exceeds the maximum or minimum temperature alarm 
setting.

To silence the alarm and turn it off (so it does not sound again), press 
ALARM ON/OFF.  (thermometer symbol) and (IN) or (OUT) disappear.

Note: The thermometer sounds a low alarm even if you set VOLUME to OFF.

(EB 1/2/1)

Privacy Policy