7-Channel Portable SAME Weatheradio w/Alert
(120-0254) Troubleshooting Faxback Doc. # 59664
If your Weatheradio is not working as it should, these suggestions might
help you eliminate the problem. If the Weatheradio still does not operate
normally, take it to your local RadioShack store for assistance.
Problem(s) Suggestion(s)
No power. Make sure the batteries are Fresh and
installed properly. See "Installing
Batteries" in Faxback Doc. # 59661.
No Sound. Adjust VOLUME.
Multiple FIPS codes are stored, Make sure the Weatheradio is set to its
But the Weatheradio only responds multiple mode (see "Programming" in
to weather alert broadcasts for Faxback Doc. # 59662.)
one code.
One or more FIPS codes are stored Make sure the radio is not in `ALL LOC'
in memory, but the radio responds mode. See Step 7 under "Programming" in
to weather alert broadcasts for Faxback Doc. # 59662.
areas not covered by those codes.
No weather broadcast when you Make sure the telescoping antenna is
press WEATHER. fully extended.
Make sure the Weatheradio is set to the
NOAA channel that is being broadcast in
your area. See "Programming" in
Faxback Doc. # 59662.
The radio is not responding Make sure you programmed the correct
properly to NWS weather alert FIPS code(s) into the Weatheradio's
broadcasts. memory. See "Programming" in Faxback
Doc. # 59662.
Make sure WEATHER ALRT ON appears. See
"Using the Alert Function" in Faxback
Doc. # 59663.
Make sure the Weatheradio is set to
receive new alert types. See "Missed
Alert Reminder Beep" in Faxback Doc. #
59663.
(BR EB 5/5/00)
Privacy Policy