Talking Clock Thermometer w/199 Year Calendar
(630-0961)                 Operation                  Faxback Doc. # 51135

Announcing The Time and Temperature

To hear the time and temperature, press TALKING.  The clock chimes and 
announces the current time and temperature.

Adjusting The Clock's Volume

Slide VOLUME LO/HI toward HI to increase the volume or LO to decrease the 
volume.

Selecting The Alarm Sound

You can set the clock to sound a rooster crow or one of 15 melodies when 
the alarm goes off.  Slide the (chick head/music symbol) switch to (chick 
head) for a rooster crow, or the (music symbol) for a melody.

There are 15 different melodies that you can either listen to or select as
an alarm sound.

1.  Interlude
2.  A Comme Amour
3.  L'herure Bleue
4.  Romance De Amor
5.  Casablanca
6.  Fur Elise
7.  A Maiden's Prayer
8.  Greensleeves
9.  The Sound of Silence
10. Beautiful Dreamer
11. Love Story
12. Godfather
13. Tchaikovsky
14. A Time for Us
15. Dolly's Dreaming and Awakening

Follow these steps to select a melody as an alarm sound.

1.  Slide (chick head/music symbol) to (music symbol).

2.  Press MUSIC.  The clock beeps and the number of the melody last played
    appears under MUSIC.

    To listen to the same melody continuously, press MUSIC again so REPEAT
    appears.

    Note:  If REPEAT does not appear, the melodies will play in sequence.

3.  Press SET then UP or DOWN to select the desired melody number.

4.  Press TALKING to listen to the melody.  To select another melody,
    press UP or DOWN.  Press ALARM to stop playing the melody.

5.  Press MODE to confirm your melody setting.  The clock returns to the
    current time/temperature display.

To check the preset melody at any time, hold down SET when you are in the
time/temperature display.  The clock plays the melody.  Release SET to
stop the melody.

Listening To The Melodies

To listen to the melodies, follow Steps 1-4 in "Selecting The Alarm
Sound," above.

Notes:  To increase the playing speed, repeatedly press TEMPO.  To
        increase the pitch, repeatedly press TONE.

        You can change the tempo or tone before you start the melody or
        while the melody is playing.

Using The Alarm

The clock has four alarm types.

       Alarm 1:  Sounds daily at a preset time.

Alarms 2, 3, 4:  These are calendar alarms that can be set to sound on a
                 specific date and time.  They can also be set as daily
                 alarms.

Setting The Daily Alarm (Alarm 1)

Repeatedly press MODE until the clock announces "Alarm one set".  ALARM 1
flashes.

Follow the steps in "Setting The Time and Date" in Faxback Doc. # 51134 to
set the desired alarm time.

At the time you set, the clock announces the alarm time.  If you selected
the rooster as the alarm sound, the alarm sounds for 1 minute, then turns
off.

If you selected the melody as the alarm sound, the alarm automatically 
turns off when the melody is finished.  To silence the alarm sooner, press
TALKING.

To turn off the alarm so it does not sound the next day or reset the 
current alarm time, repeatedly press MODE until the desired daily or 
calendar alarm appears.  Press ALARM to turn off the alarm, then 
repeatedly press MODE until the current time appears.

Setting The Calendar Alarms (Alarms 2, 3, and 4)

Follow the same steps listed in "Setting The Daily Alarm (Alarm 1) above 
to set the calendar alarms except in Step 1, repeatedly press MODE until 
the desired alarm (2, 3, or 4) flashes.  In addition to setting the alarm,
you can also set the month and date.

After you set the alarm, press ALARM to turn on the alarm.  The clock 
announces which alarm you have set.  For example, if you set Alarm 2, the
clock announces "Alarm 2 On."

To return to the time/temperature display, repeatedly press MODE until you
see the display.

Using Calendar Alarms as Daily Alarms

To set a calendar alarm as a daily alarm, follow the steps in "Setting The
Calendar Alarms," above except in addition to setting the alarm time, you
can specify the year, month, and date.

Simply press UP or DOWN to select the year, month and date after you set 
the time.  -- - -- appears to indicate that no date is set.  Repeatedly 
press MODE to return to the date/time display.

Using Snooze

To silence the alarm and snooze for 4 minutes, slide SNOOZE OFF/ON to ON.  
SNOOZE appears on the display.  The alarm sounds twice every 4 minutes.  
To turn off snooze, slide SNOOZE OFF/ON to OFF.

Viewing The Calendar

To scroll through the calendar one month at a time, repeatedly press UP or
DOWN.

To return to the present year and month, press MODE once or wait 1 minute.

(EB 1/18/99)
(EB - Rev. 5/25/99)