Drive My School Bus R/C Bus
(600-2778)                 Batteries                  Faxback Doc. # 61749

Installing the Batteries

WARNING: Dispose of batteries promptly and properly; do not bury or burn 
them.

CAUTIONS: Use only fresh batteries of the required size and recommended
          type.

          Do not mix old and new batteries, different types of batteries
          (standard, alkaline, or rechargeable) or rechargeable batteries
          of different capacities.

          If you do not plan to play with the bus for several days, remove
          the batteries.  Batteries can leak chemicals that can damage
          electronic parts.

In the Bus

Your Drive My School Bus requires four AA batteries (not supplied) for 
power.  For the best performance and longest life, we recommend Radio 
Shack alkaline batteries.

1.  Use a Phillips screwdriver to remove the screw in the bus' battery
    compartment cover, then use a coin to turn the knob toward OPEN.
    Remove the cover.

2.  Place the batteries in the compartment as indicated by the polarity
    symbols (+ and -) marked inside.

3.  Replace the cover and tighten the screw.

In the Controller

Your bus' controller requires one 9V battery and two AA batteries (not 
supplied) for power.  For the best performance and longest life, we 
recommend RadioShack alkaline batteries.

1.  Use a Phillips screwdriver to remove the screw in the dashboard
    controller's battery compartment cover.  Remove the cover.

2.  Place the batteries in the compartment as indicated by the polarity
    symbols (+ and -) marked inside.

3.  Replace the cover and tighten the screw.

When the School Bus moves slowly or not at all, replace the batteries in 
both the controller and the bus.

(EB 9/12/00)

Privacy Policy