Dragon Ball-Z Pinball Game
(600-1205)                 Preparation                Faxback Doc. # 61453

Installing Batteries

Your pinball game requires three C batteries (not supplied) for power.  
For the best performance and longest life, we recommend RadioShack 
alkaline batteries.

CAUTIONS: Use only fresh batteries of the required size and recommended
          type.

          Do not mix old and new batteries, different types of batteries
          (standard, alkaline, or rechargeable) or rechargeable batteries
          of different capacities.

Follow these steps to install batteries.

1.  Use a Phillips screwdriver to loosen the screw on the battery
    compartment cover and open the cover.

2.  Place the batteries in the compartment as indicated by the polarity
    symbols (+ and -) marked inside.

3.  Replace the cover and secure it with the screw.

When the sound weakens or becomes distorted or the game stops operating 
properly, replace the batteries.

WARNING: Dispose of old batteries promptly and properly.  Do not burn or
         bury them.

CAUTION: If you do not plan to use the pinball game for a week or longer,
         remove the batteries.  Batteries can leak chemicals that can
         destroy electronic parts.

Making The Connections

Before you play the game, you must connect the header, the feet, and the 
characters to the pinball machine.

Attach the feet in the cups at the corners of the pinball machine bottom.

Place the character figures on the domed bumpers facing right.  Then twist 
them to the right (clockwise) until they stop, to secure them.

To attach the header, connect the base of the header to the slots on top 
of the pinball machine.

Turn the base over and rotate the locking tab underneath the pinball 
machine clockwise to secure the header.

(EB 8/30/00)

Privacy Policy