Robot Lazer Battle Game
(600-1192)                 Power                      Faxback Doc. # 56695

Installing Batteries

You need a total of 14 AA batteries (not supplied) - four in each robot 
and three in each controller.  For the best operation, we recommend 
RadioShack alkaline batteries.

CAUTIONS:  Use only fresh batteries of the required size and recommended
           type.

           Do not mix old and new batteries, different types of batteries
           (standard, alkaline, or rechargeable) or rechargeable batteries
           of different capacities.

           Never leave dead or weak batteries in the robots and
           controllers.

WARNING:  Dispose of old batteries promptly and properly.  Do not bury or
          burn them.

Note:  If you do not plan to play with the robots for a week or more,
       remove the batteries.

In the Robots

1.  Slide ON/OFF to OFF.

2.  Use a Phillips screwdriver to loosen the battery compartment cover
    screw, then lift and remove the cover.

3.  Install the batteries in the compartment as indicated by the polarity
    symbols (+ and -) marked inside.

4.  Replace the cover and tighten the screw.

When the robot moves slowly or not at all, replace the batteries.

In the Controllers

1.  Use a Phillips screwdriver to loosen the battery compartment cover
    screw.  Then lift and remove the cover.

2.  Install the batteries in the compartment as indicated by the polarity
    symbols (+ and -) marked inside.

3.  Replace the cover and tighten the screw.

When the controller's range decreases, replace the batteries.

(EB 9/15/99)