Radio-Controlled Choo-Choo
(600-2761)                 Operation                  Faxback Doc. # 56451

WARNING:  Never play with your Choo-Choo in the street.

Follow these steps to control the Choo-Choo with the controller.

1.  Set ON/OFF on the back or the Choo-Choo to ON.

2.  Place the Choo-Choo on the floor, then press and hold down the button
    on the controller. The Choo-Choo chugs forward in a straight line with
    the light on and train chugging sounds.

    Notes:  The Choo-Choo works best on a clean, flat surface.

            The Choo-Choo stops when it runs into something, but the motor
            keeps running.  Release the button, then go move the train by
            hand.

3.  Release the button to stop the Choo-Choo.

4.  Hold down the button again.  The Choo-Choo goes in reverse, turning
    slightly to the left.  To make the Choo-Choo go forward again, release
    then hold down the button again.

5.  When you finish playing with the Choo-Choo, set ON/OFF to OFF.

(EB 8/18/99)