RC Choo Choo
(600-2755)                 Operation                  Faxback Doc. # 49212

WARNING:  Never play with your Choo Choo in the street.

1.  Set (rabbit/wheelflower/tortoise symbols) on the back of the Choo Choo 
    to (rabbit symbol) for high speed or (turtle symbol) for slow speed.

2.  To turn on the Choo Choo's light, set LIGHT ON/OFF on the bottom of
    the Choo Choo to ON.

3.  To make the Choo Choo chug and rumble, set SOUND ON/OFF to ON and
    press the smoke stack.

4.  Place the Choo Choo on the floor, then hold down the button on the
    controller.  The Choo Choo moves forward in a straight line.

5.  To stop the Choo Choo, release the controller's button.  Hold down the
    button again.  The Choo Choo spins counterclockwise.  To make the Choo
    Choo go forward in another direction, release then press and hold down
    the button again.

Notes:  The Choo Choo works best on a clean, flat surface.

        The Choo Choo stops when it runs into something, but the motor
        keeps running.  When this happens, be sure to release the button
        so the Choo Choo stops.  Then hold down the button again to move
        the train in another direction.

When you finish playing with the Choo Choo, set (rabbit/wheel/tortois 
symbols) to (wheel symbol).

(BR/eb 8/14/98)