RC CLOWNIE
(600-2592)                 Hints and Tips             Faxback Doc. # 44787

These hints can help you get the most enjoyment from your Clownie.

   If the Clownie's motor runs but it does not respond to the transmitter,
   move closer to the Clownie and try again.

   If someone uses a CB nearby, it might interfere with control of the 
   Clownie.  If this happens, move the Clownie away from the CB.

   You cannot operate your Clownie near devices with transmitters that use
   the same frequency (27 MHz).

   If the Clownie moves slowly, and you have installed fresh batteries,
   check the wheel mechanisms and remove any lint, thread hair, or dust  
   you find.

(br/SM 10/23/97)