Quick Touch Learning Game
(600-2489)                 Batteries                  Faxback Doc. # 32249

FOR PARENTS

INSTALLING BATTERIES

The Quick Touch requires four AA batteries (not supplied) for power.  For
the best performance and longest life, we recommend alkaline batteries,
such as Radio Shack Cat. No. 23-552 or 23-557.

1.  Use a screwdriver to loosen the screw on the battery compartment cover.

    NOTE:  You cannot remove the screw.

2.  Use a screwdriver or small coin (as shown on the compartment) to pry
    open the battery compartment cover.

3.  Put the batteries into the compartment.  Match the polarity symbols
    (+ and -) marked inside the compartment with the same symbols marked
    on the batteries.

4.  Close the cover and use a screwdriver to tighten the screw.

NOTES:  If you won't be using the game for a week or more, remove the
        batteries.

        If the game's display dims, replace all four batteries.  Do not mix
        old and new batteries.

        CAUTION:  Dispose of old batteries promptly and properly.  Do not
                  burn batteries.

        If the Quick Touch does not work properly after installing or
        replacing the batteries, press ACL (all clear) with a pointed
        object, such as a straightened paper clip, to reset the game.  The
        Quick Touch turns on, all display characters appear, and it says
        "Hello, welcome to the game."


(EB 4/24/96)
(BR 4/8/96)

Privacy Policy