Pro-2052: Unlock/Lock ID's

In this tutorial, you will be shown how to lock and unlock unwanted ID's when you are trunking. This is particularly important in trunked systems because signals you cannot listen to (such as water meters, door alarms, traffic signals, and encrypted signals are assigned ID's just like other users. You can lock out up to 100 ID's.

This tutorial contains three sub-tutorials:

For additional information on this product, see the links below:

Lock Out IDs

Step 1: Lock Out IDs
  

Pro-2052 M Trunk 2 160 search

Pro-2052 keypad/L/O
  
To lock out an ID, press L/O when the ID appears. The ID is locked out, and the next active ID appears.

Note: If you lock out an ID while searching, it is also locked out of the scan list(s).

  
Back to Top

Unlock a Single ID

Step 1: Initiate Lock Out
  

Pro-2052 bank1 M Trunk Lo 2 352 L/O

Pro-2052 keypad/L/O
  
Hold down L/O until you hear two short beeps.
  
Step 2: Select the ID to Lock Out
  
Pro-2052 bank1 M Trunk Lo 2 415 L/O
Pro-2052 keypad/up & down
  
Repeatedly press the UP or DOWN arrows to select the ID you want to unlock.
  
Step 3: Lock the Out ID
  
Pro-2052 bank1 M Trunk Lo 2 352 L/O
Pro-2052 keypad/L/0
  
Press L/O. The ID is unlocked and the next locked ID appears.
  
Step 4: Resume Search Mode
  
Pro-2052  M Trunk 100 10 search
Pro-2052 keypad/search
  
Press SEARCH to resume the previously selected function.
  
Back to Top

Unlock ALL IDs

Step 1: Unlock All IDs
  

Pro-2052 List M Trunk 1 dashes manual

Pro-2052 keypad/L/O,  E
  
Hold down L/O until you hear two short beeps, then press E to unlock all the IDs at once. The scanner beeps twice.
  
Step 2: Resume Search Mode
  
Pro-2052 M Trunk 100 10 search
Pro-2052 keypad/search
  
Press SEARCH to resume the previously selected function.
  
Back to Top

Copyright RadioShack Corporation 2002. All rights reserved.

Privacy Policy