CTCSS/VHF Business Band Transceiver
CTCSS Frequencies Faxback Doc. # 51186
Using A CTCSS Frequency
Follow these steps to select a CTCSS frequency and activate or deactivate
CTCSS.
1. While holding PUSH TO TALK, turn on the transceiver. You hear
"frequency" and the current frequency setting ("frequency nine," for
example).
2. Press MONITOR on the side of the transceiver. You hear "code off" or
"code" and the transceiver's current CTCSS code setting ("code seven,"
for example.
3. Choose a CTCSS code from the table below then repeatedly press PUSH TO
TALK to scroll through the transceiver's CTCSS codes. When you hear
the CTCSS code you want, release PUSH TO TALK.
CTCSS CTCSS
FREQ. (Hz) YOU HEAR FREQ. (Hz) YOU HEAR
none ........ off 131.8 ...... two zero
67.0 ........ one 136.5 ....... two one
71.9 ........ two 141.3 ....... two two
74.4 ...... three 146.2 ..... two three
77.0 ....... four 151.4 ...... two four
79.7 ....... five 156.7 ...... two five
82.5 ........ six 162.2 ....... two six
85.4 ...... seven 167.9 ..... two seven
88.5 ...... eight 173.8 ..... two eight
91.5 ....... nine 179.9 ...... two nine
94.8 ... one zero 186.2 .... three zero
97.4 .... one one 192.8 ..... three one
100.0 .... one two 203.5 ..... three two
103.5 .. one three 210.7 ... three three
107.2 ... one four 218.1 .... three four
110.9 ... one five 225.7 .... three five
114.8 .... one six 233.6 ..... three six
118.8 .. one seven 241.8 ... three seven
123.0 .. one eight 250.3 ... three eight
127.3 ... one nine
4. Press MONITOR to activate the selected CTCSS code. The transceiver
beeps once.
(EB 1/26/99)
(EB - Rev. 3/15/99)
Privacy Policy