Noise-Cancelling Dynamic CB Microphone
(210-1177)                 Operation                  Faxback Doc. # 47892

USING THE MICROPHONE

Push the switch on the microphone's side to send a transmission.  Release
the switch to receive.

USING THE AMP

To use the microphone's internal preamplifier, set AMP, ON/Off to ON.
Adjust VOL. to vary the output level of the amplifier.  To turn off the
amplifier, set the switch to OFF.

Note:  The VOL. setting only effects your transmitting volume and only
       works with AMP. ON/OFF set to ON.

(BR/eb 5/27/98)