BTX-123 Business Band Transceiver
(190-1204)                 Specifications             Faxback Doc. # 40872


Transmitter

Frequency Coverage................................... 152.255 - 156.250 MHz

Frequency Tolerance................................................ 1.5 kHz

Type of Modulation...................................................... FM

RF Power............................................ 1 W (high) 0.6 W (low)

Deviation............................................................ 5 kHz

Spurious Rejection................................................... 45 dB

Minimum Operating Voltage........................................ 6.5 Volts

Current Drain..................................... 500 mA (high power mode)

Receiver

Sensitivity (SINAD 12 dB)........................................... 0.5 uV

Signal-to-Noise Ratio (20 dB)....................................... 1.0 uV

AF Power Output..................................................... 250 mW

Adjacent Channel Rejection........................................... 50 dB

Squelch Sensitivity (Start)......................................... 0.5 uV

Stop Voltage..................................................... 6.5 Volts

Distortion (1 mV Input, 3 kHz Deviation)................................ 5%

General

Power Requirements............................................ 8.4 Volts DC

Antenna Length....................................... 5 7/8 Inches (150 mm)

Dimensions (HWD).............................. 2 1/2 X 1 1/2 X 6 1/3 Inches
                                                         (65 x 35 x 160 mm)

Weight..................................................... 15.5 oz (439 g)

Specifications are typical; individual units might vary.  Specifications
are subject to change and improvement without notice.

(km-07/31/1997)