MTX-100 Marine Transceiver
(190-1001)                 Specifications             Faxback Doc. # 39293


GENERAL

Channels:...................................................... Transmit 54
                                                          Receive 64 (10WX)

Frequency Control Method:.................................. PLL synthesizer

Antenna Impedance:........................................ 50 ohms, nominal

Speaker:............................................. 2-27/32 inch, 16 ohms

Microphone:........................... Rugged 600 ohms dynamic element with
                                       coiled cord and plug-in connector

Channel Display:.................................................... L.E.D.

Frequency Stability:............................................. +/-0.001%

Operating Temperature Range:................ -2 F to 122 F (-20 C to +50 C)

Shock and Vibration:................ Meets or exceeds EIA standards, RS152B
                                     and RS204C

Size:..................................... 7-1/4 x 9-5/8 x 2-1/4 inch (WHD)
                                           (185 x 245 x 58 mm)

Weight:............................................................ 2.5 lbs

Controls:........................................... On-Off/Volume, Squelch

Connectors:.................. Antenna, microphone, remote speaker, DC power

Frequency Range:................................... 156 to 158 MHz transmit
                                                    156 to 163 MHz receive

Selector Switches:............. 1W/25W power, DIM/BRIT, CH16 & main channel
                                selector switches

Lights and Indicators:............ Red Transmit, 1 Watt & CH16 LED, Green 7
                                   segment LED Channel Readout

Standard Accessories:............. Plug-in microphone, mounting bracket and
                                   hardware, DC power cord, mike hanger,
                                   spare fuse, owner's manual

Supply Voltage:................................... 13.8V DC negative ground

TRANSMITTER

Power Output:............................. 25 or 1 watt (switch selectable)

Power Requirement:........................ 25 watts output: 5.0A @ 13.8V DC
                                             1 watt output: 1.5A @ 13.8V DC

Maximum Deviation:.............................................. +/-4.7 kHz

Hum and Noise Attenuation:........................................... 45 dB

Audio Response:...................................................... LIMIT
                                                300 Hz - 10.5 dB (+1/-3 dB)
                                               1000 Hz    0   dB (+1/-3 dB)
                                               3000 Hz +  9.5 dB (+1/-3 dB)

Spurious Emission:................................. -60 dB  25 watts output
                                                    -48 dB   1 watt output

RECEIVER

Sensitivity:....................................... 0.25 uV for 12 dB SINAD
                                                    0.30 uV for 20 dB S/N

Threshold Squelch Sensitivity:..................................... 0.18 uV

Tight Squelch Sensitivity:.......................................... 1.0 uV

Spurious Response Attenuation:....................................... 85 dB

Intermodulation Attenuation:........................... 60 dB @ 12 dB SINAD
                                    43 dB @ 26 dB above useable sensitivity
                                    30 dB @ 46 dB above useable sensitivity

Adjacent Channel Rejection:.......................................... 70 dB

Selectivity:........................................ +/-7.5 kHz @ 6 dB down
                                                     +/-15 kHz @ 60 dB down

Audio Output Power:.................... 2-watt minimum at 10% distortion at
                                  1 kHz modulation and +/-3.0 kHz deviation
                                  (8 ohm speaker)

Power Requirement:........................... 0.35A @ 13.8V DC, (squelched)
                                    1.0A @ 13.8V DC, (maximum audio output)

IF Frequencies:............................................. 1st - 16.9 MHz
                                                              2nd - 455 kHz

Hum and Noise Level................................................. -50 dB

Audio Distortion:................... Less than 7% with 3 kHz deviation with
                                     1000 Hz modulating frequency

Audio Response:...................................................... LIMIT
                                                300 Hz + 10.5 dB (+2/-8 dB)
                                               1000 Hz    0   dB (+2/-8 dB)
                                               3000 Hz -  9.5 dB (+2/-8 dB)

(km-05/06/1997)

Privacy Policy