Model DX-120 AC/DC Communications Receiver 200-0120 Specifications

Model DX-120 AC/DC Communications Receiver
(200-0120)                 Specifications             Faxback Doc. # 37412

Circuit: .............................. 1 FET, 8 Transistors, 8 Diodes and
                                     2 Thermisters Super-Heterodyne system

Frequency: ......................... The tuning system is programmable and
                                          covers the following four bands:
                        Band A: .......................... 0.535 - 1.6 MHz
                        Band B: ........................... 1.55 - 4.5 MHz
                        Band C: ............................. 4.5 - 13 MHz
                        Band D: .............................. 13 - 30 MHz

Band Spread: ............................. Valiable Capacitor (23 pF Max.)
                                           Fitting for band spread system.

Intermediate Frequency: .......................................... 455 KHz

Receiving Sensitivity: ......................................... 1 - 30 uV

Signal to Noise Ratio: ............................................. 10 dB

Image Ratio: ................................................... s - 50 dB

Audio Power: ................................................. 1 Watt Max.

Loud Speaker: ....................................... 3 x 5 Inches PM Type

Power Input: ..................................... AC 117V, 50/60 Hz, 6 VA

Power Consumption: ................... DC 12 V, 5 VA, Negative Ground Only

Specifications are typical; individual units might vary. Specifications are
subject to change and improvement without notice.


(EB 1/16/97)