HTX-212 Two-Meter Mobile Transceiver
(190-1126)                 Using The Menu             FaxBack Doc.  #19150

Your HTX-242 has a menu that lets you select how some functions work.  The
previous sections included procedures that access this menu-this section
provides an overview.  Follow these steps to use the menu:

1.  VFO.

2.  Hold F for at least 1 second.  FUNC flashes.

3.  Press MR.  The first menu item appears.  Then press UP ARROW or DOWN
    ARROW to select the desired menu option.

4.  Rotate TUNE, or press UP or DOWN on the microphone, to select the
    setting.  For options that require a frequency (such as scan skip),
    you can use the microphone keypad to directly enter the frequency's
    last five digits.

5.  Press MR or PTT to save the settings.

    Menu Item  Default Option   Explanation/Available Settings      Page #

    SC         ti               Scan resume option.                     20

                    ti-time out in 10 seconds.

                    CR-resume after carrier drops.

                    SE-do not resume scanning.

Sd             2.0              Scan delay (delay before resume when    21
                    SC is set to Cr).  0, 5, 1, 2, or 4.

S1             ---.---          Scan skip frequency 1 (frequency for
                    HTX-242 to skip when scanning VFO).     20

S2             ---.---          Scan skip frequency 2.

S3             ---.---          Scan skip frequency 3.                  20

S4             ---.---          Scan skip frequency 4.                  20

S5             ---.---          Scan skip frequency 5.                  20

Lb             4                Look-back time (how often the HTX-242   30
                    checks Priority Memory Channel 1 for
                    a transmission when the alarm is
                    activated).  4, 8, 12, or 16.

SL             144.000          Lower scan limit.  With SH, determines  21
                    the VFO scanning range.

SH             148.000          Upper scan limit.                       21

Ar             oFF              Auto reply (controls whether the        34
                    HTX 242 transmits a DTMF memory
                    sequence when it is DTMF paged).  oFF
                    or on.

to             oFF              Time-out option (sets whether the       24
                    HTX-242 limits transmissions).  oFF,
                    1, 2, 3, 4, 7, 10, 15.

bp             oN               Keytone beep option.                    24

AS             on               Auto duplex/simplex option (controls
                    whether the HTX-242 uses the standard
                    repeater offsets).  oFF or on.

Ar             oFF              DTMF auto send (controls whether the    35
                    HTX-242 transmits the contents of the
                    currently-selected DTMF memory each time
                    you press PTT).  oFF or on.


(SP 02/16/96)

Privacy Policy