Compaq Presario 1267 Notebook
(250-0329) Setup Utility Faxback Doc. # 52127
Press <F10> while the COMPAQ banner screen is displayed while booting to
enter the CMOS Setup program.
The Setup has six sections, MAIN, ADVANCED, SECURITY, POWER, BOOT, and
EXIT. Use the left and right arrow keys to access the separate sections.
Use the up and down arrow keys to access the items within the sections.
Use the plus and minus keys to change values. Pressing the <F9> key
recalls the system defaults.
THE MAIN MENU
---------------------------------------------------------------------------
<MAIN> ADVANCED SECURITY POWER BOOT EXIT
System Time: [06:12:54]
System Date: [04/13/1999]
Primary Master 4327MB
Secondary Master CD-ROM
System Memory: 640 KB
Extended Memory: 64512 KB
---------------------------------------------------------------------------
F1 HELP ^v SELECT ITEM +/- CHANGE VALUES F9 SETUP DEFAULTS
ESC EXIT <- SELECT MENU ENTER SELECT SUBMENU F10 SAVE AND EXIT
---------------------------------------------------------------------------
From the MAIN menu, press the RIGHT ARROW key once to move to the ADVANCED
menu.
THE ADVANCED MENU
---------------------------------------------------------------------------
MAIN <ADVANCED> SECURITY POWER BOOT EXIT
Setup Warning
Setting items on this menu to incorrect values may cause your system to
malfunction.
Integrated Peripherals
Audio Options Menu
Large Disk Access Mode [DOS]
---------------------------------------------------------------------------
F1 HELP ^v SELECT ITEM +/- CHANGE VALUES F9 SETUP DEFAULTS
ESC EXIT <- SELECT MENU ENTER SELECT SUBMENU F10 SAVE AND EXIT
---------------------------------------------------------------------------
From the ADVANCED menu, selecting the INTEGRATED PERIPHERALS option and
pressing <ENTER> will take you to the INTEGRATED PERIPHERALS menu.
INTEGRATED PERIPHERALS
---------------------------------------------------------------------------
MAIN <ADVANCED> SECURITY POWER BOOT EXIT
Serial Port A: [AUTO]
Parallel Port: [AUTO]
Floppy Disk Controller: [Enabled]
Local Bus IDE Adapter [Both]
---------------------------------------------------------------------------
F1 HELP ^v SELECT ITEM +/- CHANGE VALUES F9 SETUP DEFAULTS
ESC EXIT <- SELECT MENU ENTER SELECT SUBMENU F10 SAVE AND EXIT
---------------------------------------------------------------------------
From the ADVANCED menu, selecting AUDIO OPTIONS MENU and pressing <ENTER>
will take you to the AUDIO OPTIONS menu.
AUDIO OPTIONS MENU
---------------------------------------------------------------------------
MAIN <ADVANCED> SECURITY POWER BOOT EXIT
SOUND: [Enabled]
Base I/O Address: [220-22F]
Interrupt: [IRQ 5]
DMA channel: [DMA 1]
DMA channel: [DMA 0]
FM I/O Address: [388-38B]
MPU I/O Address: [330-331]
---------------------------------------------------------------------------
F1 HELP ^v SELECT ITEM +/- CHANGE VALUES F9 SETUP DEFAULTS
ESC EXIT <- SELECT MENU ENTER SELECT SUBMENU F10 SAVE AND EXIT
---------------------------------------------------------------------------
From the ADVANCED menu, press the RIGHT ARROW key once to move to the
SECURITY menu.
SECURITY MENU
---------------------------------------------------------------------------
MAIN ADVANCED <SECURITY> POWER BOOT EXIT
Set Supervisor Password: [Enter]
Password on boot: [Disabled]
Fixed disk boot sector: [Normal]
---------------------------------------------------------------------------
F1 HELP ^v SELECT ITEM +/- CHANGE VALUES F9 SETUP DEFAULTS
ESC EXIT <- SELECT MENU ENTER SELECT SUBMENU F10 SAVE AND EXIT
---------------------------------------------------------------------------
From the SECURITY menu, press the RIGHT ARROW key once to move to the POWER
menu.
POWER MENU
---------------------------------------------------------------------------
MAIN ADVANCED SECURITY <POWER> BOOT EXIT
Power Savings: [Customized]
Idle Mode: [OFF]
Suspend Timeout: [15 Minutes]
Resume On Time: [Off]
Resume Time: [00:00:00]
Hard Disk Timeout: [5 Minutes]
BIOS PM on AC [OFF]
---------------------------------------------------------------------------
F1 HELP ^v SELECT ITEM +/- CHANGE VALUES F9 SETUP DEFAULTS
ESC EXIT <- SELECT MENU ENTER SELECT SUBMENU F10 SAVE AND EXIT
---------------------------------------------------------------------------
From the POWER menu, press the RIGHT ARROW key once to advance to the BOOT
menu.
BOOT MENU
---------------------------------------------------------------------------
MAIN ADVANCED SECURITY POWER <BOOT> EXIT
1. [DISKETTE DRIVE]
2. [ATAPI CD-ROM DRIVE]
3. [HARD DRIVE]
---------------------------------------------------------------------------
F1 HELP ^v SELECT ITEM +/- CHANGE VALUES F9 SETUP DEFAULTS
ESC EXIT <- SELECT MENU ENTER SELECT SUBMENU F10 SAVE AND EXIT
---------------------------------------------------------------------------
From the BOOT menu, press the RIGHT ARROW key once to move to the EXIT
menu.
EXIT MENU
---------------------------------------------------------------------------
MAIN ADVANCED SECURITY POWER BOOT <EXIT>
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes
---------------------------------------------------------------------------
F1 HELP ^v SELECT ITEM +/- CHANGE VALUES F9 SETUP DEFAULTS
ESC EXIT <- SELECT MENU ENTER SELECT SUBMENU F10 SAVE AND EXIT
---------------------------------------------------------------------------
(RDS-04/13/1999)
Privacy Policy