Compaq Presario 1267 Notebook
(250-0329)               Device Manager               Faxback Doc. # 52116

By default, the following drivers are listed in Device Manager:

COMPUTER
     CDROM
          Toshiba CD-ROM XM-1802B  (*)
     DISK DRIVES
          Generic IDE Disk Type01
          Generic NEC Floppy Disk
     DISPLAY ADAPTERS
          NeoMagic MagicGraph128XD
     FLOPPY DISK CONTROLLERS
          Standard Floppy Disk Controller
     HARD DISK CONTROLLER
          OptiViper Max Dual PCI IDE Controller
          Primary IDE Controller (Dual FIFO)
          Secondary IDE Controller (Dual FIFO)
     KEYBOARD
          Standard 101/102-Key or MicroSoft Natural Keyboard
     MODEM
          Compaq Presario 56K-DF  (**)
     MONITORS
          Laptop Display Panel (800x600)
     MOUSE
          Synaptics PS/2 Touch Pad
     NETWORK ADAPTERS
          Dial-Up Adapter
     PCMCIA SOCKET
          Texas Instruments PCI-1131 CardBus Controller
          Texas Instruments PCI-1131 CardBus Controller
     PORTS (COM & LPT)
          Communications Port (COM1)  (***)
          Printer Port (LPT1)  (****)
     SOUND VIDEO AND GAME CONTROLLERS
          ES1869 Control Interface
          ES1869 Plug and Play AudioDrive
     SYSTEM DEVICES
          Advanced Power Management Support
          APM Battery Slot
          Composite Power Source
          Direct Memory Access Controller
          IO Read Data Port for ISA Plug and Play Enumerator
          Motherboard Resources
          Numeric Data Processor
          Opti FireStar CPU to PCI Bridge
          Opti FireStar CPU to PCI Plug and Play Bridge
          PCI Bus
          Plug and Play Bios
          Programmable Interrupt Controller
          System Board
          System Board Extension for PnP Bios
          System CMOS/Real Time Clock
          System Speaker
          System Timer
     UNIVERSAL SERIAL BUS CONTROLLER
          OPTi 82C861 PCI to USB Open Host Connector
          USB Root Hub

Footnotes:

*    By default, the CD-ROM drive is drive E:

**   By default, the modem is set for COM 2.
     RESOURCE TYPE            SETTING
     Interrupt Request        03
     Input/Output Range       02F8-02FF

***  By default, the onboard serial port is set for COM 1.
     RESOURCE TYPE            SETTING
     Interrupt Request        04
     Input/Output Range       03F8-03FF

**** By default, the onboard printer port is set for LPT1.
     RESOURCE TYPE            SETTING
     Interrupt Request        07
     Input/Output Range       0378-037F

(RDS 04/13/1999)