IBM Aptiva C66/S7H
(250-0458/0460)          Controlling Module/Routine   Faxback Doc. # 41183

Controlling A Selected Module Or Routine

This section lists the Home Director Voice Command Phrases for a module or
routine that has been previously selected. To see the commands used to per-
form a particular function, refer to the following function that you would
like to perform.

Turn a Module On/Off

To turn a selected module on or off, say: TURN ON or OFF, or just say the
word ON or OFF.

  Sample Phrases: On
                  Turn On
                  Off

Dim a Lamp Module

To dim a selected lamp module, say: DIM TO with a percentage (0-100) with
or without the word PERCENT.

  Sample Phrases: Dim To 20 Percent
                  Dim To 20

Schedule an Event

To schedule an event for a selected module or routine, say: SCHEDULE.

The Schedule command will take you to the schedule window for the selected
module.

Initiate a Routine

To initiate a selected routine, say: INITIATE.

Check The Status of a Module

To check the status of a selected module that has a "status button", say:
GET STATUS or just the word STATUS.

Change The Module Name or Address

To change the name or address of a selected module or routine, say: CHANGE
with either the word NAME, ADDRESS, or CODE.

The Change command will place the cursor in the field called out so you can
edit the contents of that field.  In this command ADDRESS and CODE both
refer to the Housecode/Unit code address field.

If you just want to rename the selected module or routine just say, RENAME.
It does the same thing as CHANGE NAME.

  Sample Phrases: Change Code
                  Change Address
                  Change Name
                  Rename

Move a Module to a Different Room Tab

To move a selected module or routine to a different room tab, say: MOVE TO
or RELOCATE TO and the tab name.

  Sample Phrases: Relocate To Kitchen
                  Move To Living Room

Enable Lifestyle for a Module

To enable LifeStyle mode for a selected module, say: LIFESTYLE.

The LifeStyle command will toggle LifeStyle mode on and off for the selec-
ted module.  When LifeStyle mode is ON, it enables the selected module to
replay previous events over the last seven days when Home Director Life-
Style has been turned ON in the Tools menu.

What is This Module

To find out what a selected module or routine represents, either say: WHAT
IS THIS or simply WHAT'S THIS or SHOW ME THIS with or without the word
MODULE or following it.

  Sample Phrases: What's This
                  What is this
                  Show Me This
                  Show Me This Module
                  Show Me This Routine

Show me How to Install This Module

To find out how to install a selected module, either say: INSTALLATION with
or without the word PICTURE following it or HOW DO I INSTALL with or with-
out the word THIS and/or the word MODULE.

  Sample Phrases:  Installation
                   Installation Picture
                   How Do I Install
                   How Do I Install This
                   How Do I Install This Module


(EB 8/20/97)

Privacy Policy