SSM-1000 Audio Mixer with Echo (Rack Mount Type)
(320-3001) Specifications Faxback Doc. # 8996
Power Requirements: ...................................... 120 VAC @ 60 Hz
Echo Delay Range: ............................................ 30 - 150 ms
Input Impedance:
Microphone: .................................................600 Ohm (Low)
10 kOhm (High)
Phono Magnetic 1 and 2: .......................................... 50 kOhm
Phono Ceramic 1 and 2: .......................................... 100 kOhm
Line 1 and 2: ................................................... 100 kOhm
Output Level:
Tape Out/Main Out: ..................................................... 2V
Sensitivity For Rated Output:
(Master Volume at 10 [Max] Position):
Microphone: ................................................. 0.5 mV (Low)
2.5 mV (High)
Phono Magnetic 1 and 2: ............................................. 3 mV
Phono Ceramic 1 and 2: .............................................. 1.2V
Line 1 and 2 (+/- 3 dB Range)...................................... 150 mV
Frequency Response: ............................................ 20-20 kHz
(+/- 3 dB Range)
S/N Ratio:
Microphone: ........................................................ 55 dB
Phono Magnetic 1 and 2: ............................................ 65 dB
Line 1 and 2: ...................................................... 70 dB
T.H.D. at rated output: ............................................ 0.05%
(From 20 Hz to 20 kHz at Maximum Master Volume):
Channel Separation at 1 kHz: ....................................... 60 dB
Maximum Input Level:
Microphone: ......................................................... 7 mV
Phono Magnetic 1 and 2: ............................................ 20 mV
Phono Ceramic 1 and 2: ................................... more than 1.2 V
Line 1 and 2 (at Maximum Master Volume): ................... more than 1 V
Control Frequency Accuracy ....................................... +/- 10%
(at 60 Hz, 150 Hz, 400 Hz, 1 kHz, 2.4 kHz, 6 kHz, 15 kHz)
Control Range at Rated Output: ................................. +/- 12 dB
Dimensions (HWD): .............................. 4-1/2 x 19 x 9-1/2 Inches
(11.4 x 48.3 x 24.1 cm)
Weight: ................................................. 9.9 lbs (4.5 kg)
E. I. A. Standard For Rack Mounted Equipment:
Width: .......................................................... 482.6 mm
Height: ......................................................... 44.45 mm
Depth: ...................................................... Unrestricted
Specifications are typical; individual units might vary. Specifications are
subject to change and improvement without notice.
(RLR/EB 5/28/97)
Privacy Policy