RCA SCT-520 Dual Cassette Dubbing Deck
(140-1400)                 Preparation                Faxback Doc. # 59953

Read This Before Operating

Choose a location for your cassette deck carefully.  Avoid pacing it in 
direct sunlight or close to a source of heat.  Also avoid locations 
subject to vibrations and excessive dust, heat, cold, or moisture.

Do not open the cabinet as this might result in damage to the circuitry or 
electrical shock.  If a foreign object should get into the set, contact 
your dealer.

When removing the power plug from the wall outlet, always pull directly on 
the plug, never yank on the cord.

Do not attempt to clean the unit with chemical solvents, as this might 
damage the finish.  Use a clean, dry cloth.

Keep this manual in a safe place for future reference.

Connections

Connect your cassette deck to your receiver or amplifier using the 
supplied audio cables.

1.  Using one of the audio cables, connect the cassette deck's L and R
    LINE OUT jacks to the receiver or amplifier's left and right tape
    input jacks.

2.  Using the other audio cable, connect the cassette deck's LINE IN jacks
    to the receiver or amplifier's tape output jacks.

    Note: If you are not sure which receiver/amplifier jacks to use, refer
          to your receiver or amplifier's owner's manual.

3.  Plug the AC power cord into an AC wall socket.

(EB 6/5/00)

Privacy Policy