Stereo Hands-Free Tie-Pin Microphone
(330-3028)                 Operation                  Faxback Doc. # 59479

1.  Insert the microphone's 1/8-inch (3.5 mm) plug into the jack on the
    control box.

2.  Insert the control box's two 1/8-inch (3.5 mm) plugs into your
    amplifier or recording equipment's microphone jacks.

    Note:  If you amplifier or equipment's microphone jack is a 1/4-inch
           (6.35 mm) type, you need a suitable adapter plug (available at
           your local RadioShack store).

3.  Place the two supplied windscreen sponges over the microphones
    separately, insert the two microphones into the microphone holders,
    then attach the clip to your clothing.

    Note:  To hold the control box in place for easy access, slide the
           control box belt clip onto your belt or over a fold of fabric.

4.  Turn on the microphone by sliding ON/OFF on the control box to ON.

5.  Talk into the microphone and adjust the amplifier or recording
    equipment's volume control to the desired sound level.

    Note:  If the amplifier's or equipment's volume is too loud, you might
           hear a loud squeal. To avoid this "feedback," either reduce the
           amplifier's or equipment's volume, or adjust the angle of the
           speakers to point away from the microphone.

6.  Slide ON/OFF to OFF when you are not using the microphone.

(EB 4/26/00)

Privacy Policy