Stereo Hands-Free Tie-Pin Microphone
(330-3028)                 Power                      Faxback Doc. # 59478

Installing the Battery

Your microphone comes with a button-cell battery.  Follow these steps to 
install the battery.

1.  Press the battery compartment cover's tab, then lift to remove it.

2.  Insert the battery into the compartment with the positive (+) side up.

3.  Replace the cover.

When the microphone's sound weakens or if it stops working properly, 
replace the battery.  We recommend you use a silver-oxide battery, such as 
the 23-105 available from your local RadioShack store.

WARNINGS:  Dispose of the old battery promptly and properly.  Do not burn
           or bury it.

           Keep the button-cell battery away from children.  Swallowing a
           button-cell battery can be fatal.

CAUTIONS:  Use only a fresh battery of the required size and recommended
           type.

           If you do not intend to use your microphone for several months,
           remove the battery.

           Avoid continuous operation or storage in areas of high
           temperature and humidity.

(EB 4/26/00)

Privacy Policy