MPS-50 50 Watt Speaker/Amplifier
(320-2046)                 Specifications             Faxback Doc. # 56806

Input Impedance (High Level): ................................... 15K Ohms
                (Low Level): ..................................... 3K Ohms

Output Power, 1% T.H.D., 4 Ohms Load, 1 kHz: .................... 50 Watts

10% T.H.D. 4 Ohms Load, 1 kHz: .................................. 65 Watts

Line Out (High 50 mV Input), 2 kHz: ............................... 500 mV

Send Out (High 50 mV Input), 2 kHz: ............................... 500 mV

T.H.D. at 2 kHz, 2W: ............................. 0.2% High and Low Level

Input Sensitivity, 2 kHz at 50 Watts Output (High Level): .......... 50 mV
                                            (Low Level): ............ 5 mV

S/N Ratio (A-Weighted) (High Level): ............................... 70 dB
                       (Low Level): ................................ 60 dB

Frequency Response 0 dB = 2W (2 kHz): ...... 100 Hz - 10 dB, 10 kHz + 5 dB
                                                      (High and Low Level)

Tone Control, Bass, 100 Hz: ................... +8 dB (Max.) -11 dB (Min.)

Tone Control, Treble, 10 kHz: ................. +8 dB (Max.) -11 dB (Min.)

Return In 2 kHz 50 Watts Output: .................................. 500 mV

Delay Time: ....................................................... 150 mS

Noise Level: ........................................................ 2 mV

Power Requirement: ........................................ AC 120 V/60 Hz

Speaker: ................................................. 12-Inch, 4 Ohms

Dimensions (HWD): ....... 18-1/2 x 16-1/3 x 11 Inches (470 x 415 x 280 mm)

Weight: ............................................... 34 lbs. (15.04 kg)

Specifications are typical; individual units might vary.  Specifications
are subject to change and improvement without notice.

(EB 9/21/99)