MPA-250 250-Watt Stereo Public Address Amplifier
(320-2004)                 Specifications             Faxback Doc. # 51684

Input Impedance: ............................................... 20 kOhms

Continuous Output Power:
        Stereo at 1 kHz: .......................... 125 Watts x 2 (8 Ohms)
        Stereo at 1 kHz: .......................... 175 Watts x 2 (4 Ohms)
        Bridged at 20 Hz to 20 kHz: ................... 250 Watts (8 Ohms)
        Bridged at 1 kHz: ............................. 350 Watts (8 Ohms)

Total Harmonic Distortion: .............................. 0.1% at 80 Watts

Frequency Response (10 Hz - 50 kHz): ............................ +/- 3 dB

Input Sensitivity: ............................................... 0.775 V

Signal-to-Noise Ratio: ................................ 90 dB (A-weighted)

Speaker Impedance: ...................................... A, B (4-16 Ohms)
                                                         A + B (8-16 Ohms)
                                                       Bridged (8-16 Ohms)

Power Requirement: ........................................ 120 VAC, 60 Hz

Dimensions (HWD): ......5-5/6 x 19 x 14-1/4 Inches (11.4 x 48.2 x 30.5 cm)

Weight: .............................................. 27.53 lbs (12.5 kg)

Specifications are typical; individual units might vary.  Specifications
are subject to change and improvement without notice.

(EB 3/5/99)