Unidirectional Dynamic Microphone
(330-3021)                 Operation                  Faxback Doc. # 51425

1.  Set the microphone volume on your PA or recording system to its lowest
    setting.

2.  Be sure the power switch on the microphone is set to off, then plug
    its 1/4 inch phone plug into the microphone jack of your PA or
    recording system.

3.  Turn on your PA or recording system.

4.  Set the microphone's power switch to ON.  Adjust the microphone volume
    on your PA or recording system to the desired level.

5.  When you finish using the microphone, set the power switch to off.

To use the supplied holder with your microphone, thread its swivel adapter 
onto the top of a microphone stand.  Then slide the microphone into the 
larger end of the holder until it is secure.

(EB 2/17/99)