MPS-45 10-Watt PA Amp/Speaker
(320-2045)                 Operation                  Faxback Doc. # 49077

TURNING POWER ON/OFF

1.  Turn VOLUME to 0.

2.  Press POWER up to turn on the amplifier.  The power indicator lights.

3.  Press POWER down to turn off the amplifier.

ADJUSTING THE SOUND

Rotate TREBLE clockwise to boost, or counterclockwise to cut, high-range
(treble) frequencies (around 5 kHz).  (Boosting treble gives your sound a
clear high tone.)

Rotate BASS clockwise to boost, or counterclockwise to cut, low-range
(bass) frequencies (around 80 Hz).  (Boosting the bass gives you a heavier
low tone).

Rotate MID clockwise to boost, or counterclockwise to cut, midrange
frequencies (around 800 Hz).  (Boosting the midrange gives you a harmonic
rich sound).

Rotate VOLUME clockwise to increase or counterclockwise to decrease the
volume.

Rotate DISTORTION until you hear the amount of distortion you want.

Here are examples of how to use the control settings for different sounds.
Experiment with the settings until you find the combination that best
suits your style.

                  Heavy
                  Metal       Rock      Clear

  Distortion       10           2        OFF

  Volume            8           6         5

  Treble           10           7         6

  Mid              10           5         6

  Bass             10           5         7

USING THE MPS-45 AS A PORTABLE PUBLIC ADDRESS SYSTEM

You can use the MPS-45 as a portable PA system with a directional dynamic
microphone (not supplied) with a 1/4-inch plug.  Simply insert the
microphone's plug into the INPUT jack.

(BR/eb 8/10/98)