CFD-567 CD Radio Cassette-Corder
(140-0501)                 Care and Maintenance       Faxback Doc. # 46669

CLEANING THE LENS

If the lens becomes dirty, it may cause a skipping of sound during CD
operation.  Clean with a commercially available blower.

CLEANING THE TAPE HEADS AND TAPE PATH

Wipe the heads, the pinch rollers and the capstans with a cleaning swab
slightly moistened with cleaning fluid or alcohol after every 10 hours of
operation for optimum playback and recording quality.  To make the best
possible recording, however, we recommend that you clean all surfaces
over which tape travels before each recording.

After cleaning, insert a tape when the areas cleaned are completely dry.

DEMAGNETIZING THE TAPE HEADS

After 20 to 30 hours of use, enough residual magnetism will have built up
on the tape heads to begin to cause loss of high frequency sound and hiss.
At this time, you should demagnetize the heads and all metal parts in the
tape path with a commercially available tape head demagnetizer.

CLEANING THE CABINET

Clean the cabinet, panel and controls with a soft cloth slightly moistened
with a mild detergent solution.  Do not use any type of abrasive pad,
scouring powder, or solvent, such as alcohol or benzine.

(BR/tc 04/16/98)