NOVA 500 Speaker System
(400-0916)                 Specifications             Faxback Doc. # 39805

Frequency Response:
   One meter on axis, anechoic environment: ................ 50 Hz - 20 kHz

System Sensitivity (1): ....................... 1 Watt input of white noise
                                                produces 91.5 dB @ 1 meter.

Power Capacity (2): .................. 50 Watts - continuous program power.

Crossover Frequencies: ....................................... 3 kHz, 9 kHz

Nominal Impedance: ................................................. 8 Ohms

Dimensions (HWD): ................................. 24 x 15 x 10 1/4 Inches
                                                  (609.6 x 381 x 260.35 mm)

Net Weight: ............................................. 24 lbs. (10.9 kg)

(1)  White noise encompasses all audible frequencies just as white light
     includes all the colors of the visible spectrum. White noise simulates
     average musical instrument program material under laboratory condi-
     tions, and it provides a controlled means of energizing all of the
     transducers of a loudspeaker system simultaneously.  White noise is
     produced in a laboratory by a signal generator and it sounds very much
     like the hiss heard between FM stations.

(2)  Shaped pink noise applied continuously for a period of 8 hours causes
     no damage to the speakers or loss of tone qualities.

Specifications are typical; individual units might vary. Specifications are
subject to change and improvement without notice.


(EB 5/29/97)

Privacy Policy