Mpa-90 P.A. Amplifier
(320-2024A)                Features                   Faxback Doc. # 37934


INTRODUCTION

Your new Realistic MPA-90 PA Amplifier gives you the 100 watts RMS of solid
power - plus the versatility you need in a professional sound system.  Your
MPA-90 is a great high fidelity PA amplifier too - its wide frequency 
response (30Hz to 20kHz) makes it suitable for music as well as for voice.
Use it for live bands, in auditoriums, in a disco, at sports events, or for
office paging systems - in any installations where great sound is needed.

Read this documentation carefully.  It guides you through the various speaker
connections so that you can select the best arrangement for your system.
Then a look at USING YOUR MPA-90 shows you how easy it is to operate.

FEATURES

*  Four Microphone Inputs - let you use balanced or unbalanced microphones
   for versatility.

*  High Level Auxiliary Input - lets you connect a tape deck, tuner, or VCR.

*  Phono Input - permits connection of a magnetic cartridge equipped 
   turntable.

*  Feedback Filter - lets you control the annoying squeal of audio feedback.

*  Equalizer/Bypass Jacks - let you connect an equalizer, reverb, or other
   sound customing unit.

*  Mix Bus Jack - permits you to connect the output of a second PA amplifier
   to expand your system.

*  Five Individual Source Mixing Controls - allow simultaneous mixing of
   your sources.

*  Clipping Indicator - shows when you exceed suggested power level settings.

*  Overload/Reset with Indicator - automatically turns off power in case of
   thermal overload.  Automatically restores power when the overload is 
   removed.

(SP/km-02/07/1997)

Privacy Policy