AMX-5 Amplified Speaker System
(400-1387)                 Operation                  Faxback Doc. # 32752

1.  Set VOLUME to MIN, then (if the speaker system is connected to a
    headphone jack) be sure that the audio source's volume is also set to
    its lowest level.

2.  Set AMPLIFIER to ON to turn on the speaker system, then turn on
    the audio source.

3.  If the speaker system is connected to a headphone jack, first adjust
    the audio source's volume control, then set VOLUME on the speaker
    system to a comfortable listening level.

    CAUTION:  Setting the audio source's volume too loud can cause sound
              distortion, damage the speaker system, and even damage your
              hearing.

              If the speaker system is connected to a line-out jack, simply
              adjust VOLUME on the speaker system to the desired level.

    NOTES:  For the best stereo effect, position the speakers apart from
            each other and facing the center of the listening area.

            To set the speakers at an angle, fold down each speaker's
            built-in stand, then set the speakers on a flat surface.

4.  To enhance the bass or treble sound, set BASS or TREBLE to BOOST IN.
    Set them back to BOOST OUT to resume normal bass and treble sound.

5.  To turn off the speaker system, set AMPLIFIER to OFF.  Then turn
    off the audio source.

    NOTES:  If the connected audio source's output does not exceed 2 watts,
            you can use the speaker system with AMPLIFIER set to OFF.

            The speaker system's volume and BASS and TREBLE BOOST controls
            have no effect while AMPLIFIER is set to OFF.

CONNECTING THE SPEAKERS

For easy carrying or compact storage, you can lock the speakers together.

1.  Wrap equal lengths of speaker cord around the recessed tabs on the back
    of each speaker.

2.  As illustrated above, press the speakers together, back-to-back, so the
    tabs on the back of the right speaker fit into the holes on the back of
    the left speaker.

3.  Grasp and hold the left speaker in place and slide the right speaker
    downward to lock the speakers together.


(YO/all-05/14/96)

Privacy Policy