PA Electronic Reverb Control
(320-1107)                 Specifications             Faxback Doc. # 32639

Input Impedance:
   MIC:.....................................................0.4 mV 600 Ohms
   LINE:....................................................100 mV 42 Kohms
Output Impedance:
   MIC:.....................................................0.4 mV 600 Ohms
   LINE:....................................................100 mV 42 Kohms
Ouput level (Phono Type):
   MIC:..............................................................100 mV
   LINE:.............................................................100 mV
Output Level (MIC Type) at 400 mV Output:
   MIC:................................................................7 mV
   LINE:...............................................................7 mV
Distortion at 400 mV (Output:
   MIC:......................................................Less Than 0.2%
   LINE:.....................................................Less Than 0.2%
Signal-to-Noise Ratio at 400 mV Output:
   MIC:...................................................Better than 50 dB
   LINE:..................................................Better than 55 dB
Frequency Response @ -3 dB:
   MIC:........................................................20 Hz-17 kHz
   LINE:.......................................................15 HZ-30 kHz
Delay Time:.......................................................5-95 m/Sec
Power Requirements:
   DC:.......................................................One 9V Battery
   AC:........................................AC Adapter (Cat. No. 273-1455
Dimensions (HWD):.............................1 5/8 x 10 1/2 x 5 7/8 Inches
                                                        (41 X 267 X 149 mm)
Weight:.............................................1 lb. 15.7 oz. 898.7 g)

Specifications are typical; individual units might vary.  Specifications
are subject to change and improvement without notice.


(LB/all-05/09/96)

Privacy Policy